--- dmraid-1.0.0.rc16.orig/debian/watch
+++ dmraid-1.0.0.rc16/debian/watch
@@ -0,0 +1,3 @@
+# watch control file for dmraid
+version=3
+http://people.redhat.com/heinzm/sw/dmraid/src dmraid-([\d.].*)\.tar\.bz2
--- dmraid-1.0.0.rc16.orig/debian/dmraid.dirs
+++ dmraid-1.0.0.rc16/debian/dmraid.dirs
@@ -0,0 +1 @@
+usr/share/bug/dmraid
--- dmraid-1.0.0.rc16.orig/debian/compat
+++ dmraid-1.0.0.rc16/debian/compat
@@ -0,0 +1 @@
+7
--- dmraid-1.0.0.rc16.orig/debian/README.source
+++ dmraid-1.0.0.rc16/debian/README.source
@@ -0,0 +1,135 @@
+dmraid subversion repository has been converted into a git repository, hosted
+at git.debian.org.
+
+http://git.debian.org/?p=users/derevko-guest/dmraid.git
+git://git.debian.org/git/users/derevko-guest/dmraid.git
+
+For dmraid-debian developers:
+
+git clone ssh://<your-login>@git.debian.org/git/users/derevko-guest/dmraid.git
+
+
+== Best practices ==
+
+* debian/changelog
+
+Do not update your change in debian/changelog, we will use git-dch(1) before
+doing a release or anytime between releases.
+
+The simplest way is doing all the changes to the debian-branch without touching
+debian/changelog at all. Then, when done, do:
+
+git-dch --release
+
+This will look up the latest released version in the changelog, increment the
+version in the Debian changelog, generate changelog messages from the
+corresponding Git commit id up to the branch head and finally spawns an editor
+for final changelog file editing by invoking dch --release.
+
+But what if you want to have an (unreleased) snapshot for intermediate testing:
+
+git-dch --snapshot
+
+will generate a snapshot release with a specially crafted version number and a
+warning in the changelog that this is a snapshort release:
+
+git-buildpackage (0.3.7~1.gbp470ce2) UNRELEASED; urgency=low
+
+  ** SNAPSHOT build @470ce29ec7877705c844474a2fd89869aea0406d **
+
+  * add support for automatic snapshot 
+
+During subsequent calls with --snapshot this version number will continue to
+increase. Since the snapshot banners contains the commit id of the current
+branch head, git-dch can figure out what to append to the changelog by itself:
+
+git-dch --snapshot --auto
+
+will fetch the commit id and add changelog entries from that point to the
+current HEAD - again auto incrementing the version number. If you don't want to
+start at that commit id, you can specify any id or tag with:
+
+git-dch --since=e76a6a180a57701ae4ae381f74523cacb3152780 --snapshot
+
+After testing you can remove the snapshot header by a final git-dch call:
+
+git-dch --since=HEAD --release
+
+This will add no further entries but simply remove the specially crafted version
+number and the snapshort header. Again you can use any commit id or tag instead
+of HEAD if you want to add further changelog entries - or you can (of course)
+use --auto again. 
+
+
+* git commit
+
+Usually changelog entries should correspond to a single Git commit. In this case
+it's convenient to include the commit id in the changelog entry. This has the
+advantage that it's easy for people to identify changes without having to write
+very extensive changelog messages - the link back to Git can be automated via
+the Vcs-Browser and Vcs-Git fields in debian/control.
+
+See Cl2vcs for how this looks: https://honk.sigxcpu.org/cl2vcs/index.cgi?pkg=dmraid
+
+For this reason it´s a good idea to begin the commit message with a single
+line summarizing the change (it will be the changelog entry, so add the Close:
+or LP: entry), followed by a blank line and then a more thorough description.
+
+
+* Configuration files
+
+Here my configuration files, if you like cowbuilder you can use them.
+
+~/.gbp.conf :
+
+[DEFAULT]
+builder = /usr/bin/git-pbuilder
+cleaner = fakeroot debian/rules clean
+pristine-tar = True
+
+[git-buildpackage]
+export-dir = ../build-area/
+tarball-dir = ../tarballs/
+sign-tags = True
+#keyid = 0xAE3BE9AA
+[git-dch]
+id-length=7
+meta=True
+
+
+
+
+~/.gitconfig
+
+[user]
+	name = Giuseppe Iuculano
+	email = giuseppe@iuculano.it
+[color]
+	diff = auto
+	status = auto
+	branch = auto
+[branch "master"]
+	remote = origin
+	merge = refs/heads/master
+[branch "upstream"]
+	remote = origin
+	merge = refs/heads/upstream
+[branch "pristine-tar"]
+	remote = origin
+	merge = refs/heads/pristine-tar
+
+
+
+
+
+/usr/bin/git-pbuilder
+
+#!/bin/sh
+# 
+# pbuilder helper for git-buildpackage
+# use this as "builder" in gbp.conf
+set -e
+
+# pass all options to dpkg-buildpackage:
+pdebuild --pbuilder cowbuilder --auto-debsign --debsign-k AE3BE9AA $PBUILDER_OPTS --debbuildopts "-i\.git/ -I.git $*"
+
--- dmraid-1.0.0.rc16.orig/debian/dmraid-udeb.install
+++ dmraid-1.0.0.rc16/debian/dmraid-udeb.install
@@ -0,0 +1,2 @@
+debian/udeb/sbin/dmraid sbin
+debian/dmraid-activate sbin
--- dmraid-1.0.0.rc16.orig/debian/libdmraid-dev.install
+++ dmraid-1.0.0.rc16/debian/libdmraid-dev.install
@@ -0,0 +1,2 @@
+debian/standard/lib/*.a usr/lib
+debian/standard/usr/include/dmraid usr/include
--- dmraid-1.0.0.rc16.orig/debian/libdmraid1.0.0.rc16-udeb.install
+++ dmraid-1.0.0.rc16/debian/libdmraid1.0.0.rc16-udeb.install
@@ -0,0 +1 @@
+debian/udeb/lib/*.so.* lib
--- dmraid-1.0.0.rc16.orig/debian/dmraid-activate
+++ dmraid-1.0.0.rc16/debian/dmraid-activate
@@ -0,0 +1,291 @@
+#!/bin/sh
+#
+# dmraid-activate: Script to reformat the output of dmraid to be useful with
+# udev.
+#
+# (c) 2008 Canonical Ltd.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+# Arguments: $1 = Name of array you want activated.
+activate_array ()
+{
+	Raid_Setinfo=$(dmraid -i -si "$1")
+	if [ -z "$Raid_Setinfo" ]; then
+		log_error "Cannot retrieve RAID set information for $1"
+		return 1
+	fi
+
+	Raid_Type=$(dmraid -i -si -ct "$1")
+	Raid_Nodevs=$(dmraid -i -si -cd "$1")
+
+	case "$Raid_Type" in
+		stripe)
+			if [ "$Raid_Nodevs" -lt 2 ]; then
+				if [ -n "$Degraded" ]; then
+					log_error "Cannot bring up a RAID0 array in degraded mode, not all devices present."
+				fi
+				return 2
+			fi
+			;;
+		mirror)
+			if [ "$Raid_Nodevs" -lt 2 ]; then
+				if [ -z "$Degraded" ]; then
+					log_error "Raid set $Raid_Name is degraded. Not activating"
+					return 2
+				else
+					log_warning "Activating $Raid_Name in degraded mode"
+					Return_Val=3
+				fi
+			fi
+			;;
+		raid5_*)
+			modprobe -q dm_raid45
+			if [ "$Raid_Nodevs" -lt 3 ]; then
+				if [ -z "$Degraded" ]; then
+					log_error "Raid set $Raid_Name is degraded. Not activating"
+					return 2
+				else
+					log_warning "Activating $Raid_Name in degraded mode"
+					Return_Val=3
+				fi
+			fi
+			;;
+	esac
+
+	# At this point we have the required number of devs, or the user wants the
+	# array brought up in degraded mode, except in the case of striped arrays.
+	# We need to know the root device for determining if the -Z flag can be used 
+	# (see #533848 and LP: 392510)
+	if [ -z "$ROOT" ]; then
+		for x in $(cat /proc/cmdline); do
+			case $x in
+				root=*)
+				ROOT=${x#root=}
+				;;
+			esac
+		done
+		case "$ROOT" in
+			LABEL=*)
+			ROOT=$(readlink -f /dev/disk/by-uuid/${ROOT#LABEL=})
+			;;
+			UUID=*)
+			ROOT=$(readlink -f /dev/disk/by-uuid/${ROOT#UUID=})
+			;;
+		esac
+	else
+		ROOT=$(readlink -f $ROOT)
+	fi
+	
+	if (echo $ROOT | grep -q $1) ; then
+		dmraid -i -ay -Z "$1"
+	else
+		dmraid -i -ay "$1"
+	fi
+	
+	return $Return_Val
+}
+
+log_warning()
+{
+	if type logger > /dev/null ; then
+		logger -t dmraid-activate "WARNING: $1"
+	else
+		echo "dmraid-activate: WARNING: $1"
+	fi
+}
+
+log_error()
+{
+	if type logger > /dev/null ; then
+		logger -t dmraid-activate "ERROR: $1"
+	else
+		echo "dmraid-activate: ERROR: $1"
+	fi
+}
+
+ddf1_virtual_drive_names()
+{
+	ddf1_awk_script="$(cat <<'EOF'
+BEGIN {
+    section = ""
+    disk_ref = ""
+    guid_i = 0
+
+    # Heximal to decimal conversion array
+    for (i = 0; i <= 9; i++) hex2dec[i] = i
+    hex2dec["a"] = 10; hex2dec["b"] = 11; hex2dec["c"] = 12
+    hex2dec["e"] = 13; hex2dec["d"] = 14; hex2dec["f"] = 15;
+}
+
+function section_begins(name)
+{
+    section = name
+    vd_guid = ""
+    drive_map = 0
+}
+
+function extract_vd_guid(line,      g)
+{
+    g = substr(line, match(line,/\[[0-9a-f ]+\]$/)+1, RLENGTH-2)
+    gsub(/ /, "", g)
+    # IF LSI, do timestamp substitution to get persistent name, see
+    # 19_ddf1_lsi_persistent_name.patch
+    if (g ~ /^4c5349/)
+        g = substr(g, 1, 32) "47114711" substr(g, 41)
+    return g
+}
+
+function extract_vd_name(line,     hex, n, max, i, d1, d2, sed)
+{
+    n = tolower(substr(line, match(line,/\[[0-9a-f ]+\]$/)+1, RLENGTH-2))
+    max = split(n, hex, / /)
+
+    if (max <= 0 || hex[0] == "00") return ""
+
+    # Convert name from hex to string (16 bytes)
+    n = ""
+    for (i = 1; i <= max; i++) {
+        d1 = hex2dec[substr(hex[i], 1, 1)]
+        d2 = hex2dec[substr(hex[i], 2, 1)]
+        if ((d1 + d2) == 0) break
+        n = n sprintf("%c", d1 * 16 + d2)
+    }
+    # Shell-escape single quotes in the name
+    gsub(/'/,"'\\''", n)
+    # Finally strip non-graph chars from the end of the string
+    # mawk does not support character classes. Use sed.
+    sed = "echo '" n "' | sed 's/[^[:graph:]]\+$//'"
+    sed | getline n
+    close(sed)
+    return n
+}
+
+{
+    if (!/^0x/ && / at /) {
+        # Section begins
+        section_begins(substr($0, 1, match($0, / at /)-1))
+    } else if (section == "Disk Data" && /^0x020 reference:[ \t]*[0-9A-Fx]+/) {
+        disk_ref = $3
+        sub(/^0x/, "", disk_ref)
+    } else if (disk_ref) {
+        # We need to parse 'Virtual Drive' sections in order to extract VD
+        # names
+        if (section == "Virtual Drive") {
+            if (/^0x000 guid:/) {
+                vd_guid = extract_vd_guid($0)
+            } else if (/^0x030 name:/) {
+                vd_name = extract_vd_name($0)
+                if (vd_name)
+                    vd_names[vd_guid] = vd_name
+            }
+        } else if (section == "Virtual Drive Config Record") {
+            if (/^0x008 guid:/) {
+                vd_guid = extract_vd_guid($0)
+            } else if (drive_map) {
+                # 0: 4BCBB980 @ 0
+                if ($2 == disk_ref) {
+                    guids[guid_i] = vd_guid
+                    guid_i++
+                }
+            } else if (vd_guid) {
+                drive_map = /^Drive map:/
+            }
+        }
+    }
+}
+END {
+    # Print discovered virtual drive names (or GUIDs) which belong to this
+    # physical drive
+    for (guid_i in guids) {
+        guid = guids[guid_i]
+        if (guid in vd_names) {
+            print vd_names[guid]
+        } else {
+            print guid
+        }
+    }
+}
+EOF
+)"
+	dmraid -i -n "$1" | awk "$ddf1_awk_script"
+}
+
+if grep -qs "\<nodmraid\>" /proc/cmdline; then
+	log_warning "dmraid disabled by boot option"
+	exit 0
+fi
+
+modprobe -q dm_mod
+
+if [ -z "$1" ] || [ "$1" = "--degraded" ] && [ "$#" -lt 2 ]; then
+	echo "Node name not specified." >&2
+	exit 1
+fi
+
+if [ "$1" = "--degraded" ]; then
+	Degraded=1
+	Node_Name=$2
+else
+	Node_Name=$1
+fi
+
+Raid_Name=$(dmraid -i -r -cr /dev/$Node_Name | grep -vi "No RAID disks" | grep -vi "formats discovered")
+
+if [ -z "$Raid_Name" ]; then
+	exit 0
+fi
+
+newline="
+"
+
+case "$Raid_Name" in
+	isw_*)
+		# We need a special case for isw arrays, since it is possible to have several
+		# subsets of a RAID group, of varying RAID types.
+		Isw_Group_Name=$Raid_Name
+		Isw_Subsets=$(dmraid -i -n "/dev/$Node_Name" | grep volume | sed 's/.*volume: " *\(.*\)"$/\1/')
+
+		for isw_subset in $Isw_Subsets
+		do
+			activate_array "${Isw_Group_Name}_${isw_subset}"
+		done
+		break
+		;;
+	.ddf1_disks)
+		# Dummy name for the main DDF1 group. Needs special handling to
+		# find RAID subsets (name or GUID) for this physical drive
+		Ddf1_names=`ddf1_virtual_drive_names "/dev/$Node_Name"`
+
+		# Returned names might contain space characters. Therefore
+		# split fields at new line. Use $IFS to avoid forking a new shell
+		save_IFS="$IFS"
+		IFS="$newline"
+		for ddf1_name in $Ddf1_names
+		do
+			IFS="$save_IFS"
+			activate_array "ddf1_${ddf1_name}"
+			IFS="$newline"
+		done
+		IFS="$save_IFS"
+		break
+		;;
+	*)
+		activate_array "$Raid_Name"
+		break
+		;;
+esac
+
+exit $Return_Val
--- dmraid-1.0.0.rc16.orig/debian/libdmraid-dev.links
+++ dmraid-1.0.0.rc16/debian/libdmraid-dev.links
@@ -0,0 +1 @@
+lib/libdmraid.so.1.0.0.rc15 usr/lib/libdmraid.so
--- dmraid-1.0.0.rc16.orig/debian/dmraid.postrm
+++ dmraid-1.0.0.rc16/debian/dmraid.postrm
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+set -e
+
+case "$1" in
+    remove|purge)
+        if command -v update-initramfs >/dev/null 2>&1; then
+		update-initramfs -u
+    	fi
+
+     ;;
+    upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+
+
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+
+esac
+
+
+#DEBHELPER#
+
+
--- dmraid-1.0.0.rc16.orig/debian/copyright
+++ dmraid-1.0.0.rc16/debian/copyright
@@ -0,0 +1,199 @@
+This is the Ubuntu / Debian GNU/Linux prepackaged version of dmraid.
+
+Packaged by Fabio M. Di Nitto <fabbione@ubuntu.com>.
+
+Re-debianized by Giuseppe Iuculano <giuseppe@iuculano.it>
+
+It was downloaded from http://people.redhat.com/heinzm/sw/dmraid/
+Upstream Author: Heinz Mauelshagen <heinzm@redhat.com>
+
+upstream LICENSE
+****
+
+   Copyright (C) 2004-2008  Heinz Mauelshagen, Red Hat GmbH.
+   Copyright (C) 2006 Darrick Wong, James Simshaw, Adam DiCarlo IBM.
+   Copyright (c) 2001, 2002, 2004 Adaptec Inc.
+   Copyright (C) 2004  NVidia Corporation. All rights reserved.
+   All rights reserved.
+  
+   This dmraid code is free software;
+   you can redistribute and/or modify it under the terms of
+   the GNU General Public License as published by the
+   Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+  
+   dmraid is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+   General Public License for more details.
+  
+   You should have received a copy of the GNU (Lesser) General Public
+   License along with this dmraid code; if not, write to the Free
+   Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+   MA 02110-1301, USA.
+
+****
+
+On Ubuntu / Debian GNU/Linux systems, the complete text of the GNU
+General Public License can be found in `/usr/share/common-licenses/GPL'.
+The complete text of the GNU Lesser General Public License can be found in
+`/usr/share/common-licenses/LGPL'.
+
+The Debian packaging is © 2008, Giuseppe Iuculano <giuseppe@iuculano.it> and
+is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
+
+
+1.0.0.rc15/lib/metadata/reconfig.c:
+
+    Copyright (C) 2006 IBM, all rights reserved.
+    Written by Darrick Wong <djwong@us.ibm.com>,
+    James Simshaw <simshawj@us.ibm.com>, and
+    Adam DiCarlo <bikko@us.ibm.com>
+
+    Copyright (C) 2006-2008 Heinz Mauelshagen, Red Hat GmbH
+         All rights reserved
+
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/metadata/metadata.c, 1.0.0.rc15/lib/format/format.c,
+1.0.0.rc15/lib/format/ataraid/isw.c, 1.0.0.rc15/lib/device/scsi.c,
+1.0.0.rc15/lib/device/scsi.h, 1.0.0.rc15/lib/misc/misc.c,
+1.0.0.rc15/lib/activate/activate.c, 1.0.0.rc15/lib/activate/devmapper.c,
+1.0.0.rc15/tools/commands.c, 1.0.0.rc15/tools/commands.h,
+1.0.0.rc15/tools/toollib.c, 1.0.0.rc15/include/dmraid/lib_context.h,
+1.0.0.rc15/include/dmraid/list.h, 1.0.0.rc15/include/dmraid/misc.h,
+1.0.0.rc15/include/dmraid/dmraid.h, 1.0.0.rc15/include/dmraid/metadata.h,
+1.0.0.rc15/include/dmraid/format.h:
+
+    Copyright (C) 2004-2008  Heinz Mauelshagen, Red Hat GmbH.
+         All rights reserved
+    Copyright (C) 2007   Intel Corporation. All rights reserved.
+    November, 2007 - additions for Create, Delete, Rebuild & Raid 10.
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/metadata/log_ops.c:
+
+    Copyright (C) 2006 Darrick Wong, IBM
+         All rights reserved
+    Copyright (C) 2006 Heinz Mauelshagen, Red Hat GmbH
+         All rights reserved
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/format/ataraid/nv.c:
+
+    Copyright (C) 2004      NVidia Corporation. All rights reserved.
+    Copyright (C) 2004-2008  Heinz Mauelshagen, Red Hat GmbH.
+         All rights reserved
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/format/ataraid/asr.c:
+
+    Copyright (C) 2005-2006 IBM, All rights reserved.
+    Written by Darrick Wong <djwong@us.ibm.com>,
+    James Simshaw <simshawj@us.ibm.com>, and
+    Adam DiCarlo <bikko@us.ibm.com>
+    Copyright (C) 2006  Heinz Mauelshagen, Red Hat GmbH
+         All rights reserved
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/format/ataraid/nv.h:
+
+    Copyright (C) 2004,2005  NVidia Corporation. All rights reserved.
+    dmraid extensions:
+    Copyright (C) 2004,2005 Heinz Mauelshagen, Red Hat GmbH.
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/format/ataraid/isw.h
+
+    Copyright (C) 2003,2004,2005 Intel Corporation.
+    dmraid extensions:
+    Copyright (C) 2004,2005 Heinz Mauelshagen, Red Hat GmbH.
+         All rights reserved
+    Authors: Boji Tony Kannanthanam < boji dot t dot kannanthanam at intel dot com >
+    Martins Krikis < martins dot krikis at intel dot com >
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/format/ataraid/hpt37x.h:
+
+    Copyright (c) 2000,2001 Søren Schmidt <sos@FreeBSD.org>
+    All rights reserved.
+    dmraid modifications:
+    Copyright (C) 2004,2005  Heinz Mauelshagen, Red Hat GmbH.
+         All rights reserved
+    LICENSE: 
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer,
+       without modification, immediately at the beginning of the file.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+    3. The name of the author may not be used to endorse or promote products
+       derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE AUTHOR `AS IS'' AND ANY EXPRESS OR
+    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+    OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+    IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+    THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+1.0.0.rc15/lib/format/ataraid/asr.h:
+
+    Copyright (c) 2005-2006 IBM (actual code changes by Darrick Wong)
+    Copyright (c) 2001, 2002, 2004 Adaptec Inc.
+    All rights reserved.
+
+    LICENSE: 
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer,
+       without modification, immediately at the beginning of the file.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+    3. The name of the author may not be used to endorse or promote products
+       derived from this software without specific prior written permission.
+
+    Alternatively, this software may be distributed under the terms of the
+    GNU General Public License ("GPL") version 2, see below
+
+1.0.0.rc15/lib/format/ddf/ddf1_dump.c, 1.0.0.rc15/lib/format/ddf/ddf1.c,
+1.0.0.rc15/lib/format/ddf/ddf1_cvt.h, 1.0.0.rc15/lib/format/ddf/ddf1_cvt.c,
+1.0.0.rc15/lib/format/ddf/ddf1.h, 1.0.0.rc15/lib/format/ddf/ddf1_lib.c,
+1.0.0.rc15/lib/format/ddf/ddf1_lib.h, 1.0.0.rc15/lib/format/ddf/ddf1_dump.h:
+
+    Copyright (C) 2005-2006 IBM, All rights reserved.
+    Written by Darrick Wong <djwong@us.ibm.com>
+    Copyright (C) 2006 Heinz Mauelshagen, Red Hat GmbH
+         All rights reserved
+    LICENSE: GPL, see below
+
+1.0.0.rc15/lib/format/ddf/ddf1_crc.c:
+
+    Copyright (C) 2005-2006 IBM, All rights reserved.
+    Written by James Simshaw <simshawj@us.ibm.com>
+    Copyright (C) 2006-2008 Heinz Mauelshagen, Red Hat GmbH
+         All rights reserved
+    LICENSE: GPL, see below
+
+1.0.0.rc15/include/dmraid/reconfig.h:
+
+    Copyright (C) 2006 Darrick Wong, IBM.
+         All rights reserved
+    Copyright (C) 2006-2008 Heinz Mauelshagen Red Hat GmbH.
+         All rights reserved
+    LICENSE: GPL, see below
+
+debian/dmraid-activate:
+
+    (c) 2008 Canonical Ltd.
+    LICENSE: GPL, see below
--- dmraid-1.0.0.rc16.orig/debian/changelog
+++ dmraid-1.0.0.rc16/debian/changelog
@@ -0,0 +1,539 @@
+dmraid (1.0.0.rc16-4.2.6.201403200835) ucs4-0-0-0; urgency=low
+
+  * UCS auto build. No patches were applied to the original source package
+
+ -- Univention builddaemon <buildd@univention.de>  Thu, 20 Mar 2014 08:35:18 +0100
+
+dmraid (1.0.0.rc16-4.2) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Call udevadm settle before activating dmraid devices
+    (Closes: #677450)
+
+ -- Ulrich Dangel <uli@debian.org>  Mon, 10 Sep 2012 17:35:50 +0100
+
+dmraid (1.0.0.rc16-4.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * dmraid-active: properly handle the case when DDF1 virtual drive has a name.
+    (Closes: #603319)
+
+ -- Modestas Vainius <modax@debian.org>  Sat, 18 Dec 2010 22:26:41 +0200
+
+dmraid (1.0.0.rc16-4) unstable; urgency=low
+
+  [ Modestas Vainius ]
+  * [7b2bf79] Make dmraid-activate work with DDF1 arrays by special-
+    casing their handling. Similar to ISW case, there do not seem to be
+    a way for getting raid subsets for the physical drive except parsing
+    native log. (Closes: #603319)
+
+ -- Giuseppe Iuculano <iuculano@debian.org>  Mon, 22 Nov 2010 13:02:29 +0100
+
+dmraid (1.0.0.rc16-3) unstable; urgency=low
+
+  * [3bea125] debian/patches/20_fix_isw_sectors_calculation.patch: Fix
+    isw raid0 incorrect  sectors calculation (Closes: #561866) - thanks
+    to Valentin Pavlyuchenko
+  * [239630a] Added ${misc:Depends} in Depends
+
+ -- Giuseppe Iuculano <iuculano@debian.org>  Mon, 28 Dec 2009 10:57:55 +0100
+
+dmraid (1.0.0.rc16-2) unstable; urgency=low
+
+  * [0819a82] debian/patches/18_pdc_raid10_failure..patch: fix pdc
+    metadata format handler to report the proper number of devices in a
+    subset
+  * [8418d6b] debian/patches/19_ddf1_lsi_persistent_name.patch: Because the
+    LSI bios changes the timestamp in the metadata on every boot, neutralize
+    it in order to allow for persistent names.
+
+ -- Giuseppe Iuculano <iuculano@debian.org>  Thu, 26 Nov 2009 11:37:24 +0100
+
+dmraid (1.0.0.rc16-1) experimental; urgency=low
+
+  [ Tormod Volden ]
+  * [aed3ea8] Add support for "nodmraid" boot option
+
+  [ Giuseppe Iuculano ]
+  * [6ae6d88] Imported Upstream version 1.0.0.rc16
+  * [3bdcbf4] Remove old 1.0.0.rc15 directory
+  * [f2b47d1] Refreshed patches and deleted patches merged in upstream
+  * [27f877d] SONAME bump, libdmraid1.0.0.rc15 -> libdmraid1.0.0.rc16
+  * [8ea0cf4] Updated symbols file
+  * [e2bd834] debian/patches/02_disable_dmreg.patch: Disabled all dmreg
+    stuff
+  * [7339f26] Added 951 disk offset for Promise FastTrak S150 TX2plus
+    (LP: #465198) - thanks to Even Ambjørnrud
+  * [fbe64d4] Updated my email address and removed DM-Upload-Allowed
+    control field
+
+ -- Giuseppe Iuculano <iuculano@debian.org>  Sun, 01 Nov 2009 19:00:41 +0100
+
+dmraid (1.0.0.rc15-11) unstable; urgency=low
+
+  * [ce4e2dc] 15_activate_multiple_raid_sets.patch: Continue onto all
+    raid sets instead of returning after processing the first. (LP: #401713)
+  * [58a1426] debian/initramfs/dmraid.initramfs-local-top/dmraid: Check
+    the exit code before parsing output, thanks to Tormod Volden.
+    (Closes: #542256) (LP: #415280, #376792)
+  * [91d2b67] Updated to standards version 3.8.3 (No changes needed)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sun, 23 Aug 2009 18:06:13 +0200
+
+dmraid (1.0.0.rc15-10) unstable; urgency=low
+
+  * [1a1b752] debian/dmraid-activate: Use the -Z flag only if root
+    partition is mountd in a dmraid array.
+    (Closes: #533848) (LP: #392510)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Wed, 15 Jul 2009 18:53:52 +0200
+
+dmraid (1.0.0.rc15-9) unstable; urgency=low
+
+  [ Giuseppe Iuculano ]
+  * [ea0c659] debian/rules: Copy the autotools stuff before copying the
+    1.0.0.rc15 directory to the build directory. (Closes: #533689)
+
+  [ Luke Yelavich ]
+  * [317853a] debian/patches/17_isw-probe-hpa.patch: Probe isw disks
+    with [some] HPA awareness, thanks to Robert Collins
+    <robert@ubuntu.com>. (LP: #372170)
+
+  [ Giuseppe Iuculano ]
+  * [89d15f3] debian/initramfs/dmraid.initramfs-hook/dmraid: copy grep
+    only if if BUSYBOX=n, thanks to Colin Watson (Closes: #534299)
+  * [a2f0730] Updated to standards version 3.8.2 (No changes needed).
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sat, 11 Jul 2009 10:47:47 +0200
+
+dmraid (1.0.0.rc15-8) unstable; urgency=low
+
+  * [68f05e2] Fixed some typos in dmraid man page, Thanks A. Costa.
+    (Closes: #525252)
+  * [c72bf51] Added grep in initrd, dmraid-activate needs it. (Closes: #528998)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Fri, 22 May 2009 19:06:09 +0200
+
+dmraid (1.0.0.rc15-7) unstable; urgency=low
+
+  * [c617e81] debian/dmraid.postinst: Do not run update-initramfs if it
+    is not installed (Closes: #522799)
+  * [3011c19] debian/patches/16_fix_isw_sectors_calculation.patch: Fix
+    isw raid0 incorrect  sectors calculation, thanks to Valentin
+    Pavlyuchenko (Closes: #524637) (LP: #337284)
+  * [9cf5ed5] debian/patches/14_isw-serial-fix.patch: Use Hans de Goede
+    patch.
+  * [18ece89] debian/dmraid-activate: grep also for "formats discovered"
+    when assigns Raid_Name, and do not use "cut" to assign
+    Isw_Group_Name. In this way dmraid-activate works also for user
+    having multiple metadata signatures and/or not using initramfs.
+    (Closes: #523660)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Wed, 22 Apr 2009 11:55:49 +0200
+
+dmraid (1.0.0.rc15-6) unstable; urgency=low
+
+  * [6af052c] Remove 15_isw_incorrect_status_fix.patch, it causes a
+    segfault. (Closes: #521104)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Wed, 25 Mar 2009 22:34:59 +0100
+
+dmraid (1.0.0.rc15-5) unstable; urgency=low
+
+  * [ad6ac87] do not use basename in the local-top initramfs script
+    (Closes: #520875)
+  * [b1fc9ec] Added a bug submission control script. It allows Debian's bug
+    tools to include relevant information in bug reports.
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Mon, 23 Mar 2009 14:22:17 +0100
+
+dmraid (1.0.0.rc15-4) unstable; urgency=low
+
+  * [546b293] debian/patches/05_jmicron-name-fix.patch: Fix segfault
+    when attempting to generate name for jmicron controllers. Thanks to
+    danwood76 (LP: #344215)
+  * [4b3dfa0] debian/patches/15_isw_incorrect_status_fix.patch: fix
+    incorrect status displayed when disk is missing (isw)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sun, 22 Mar 2009 08:46:25 +0100
+
+dmraid (1.0.0.rc15-3) unstable; urgency=low
+
+  * [748a001] debian/patches/14_isw-serial-fix.patch: Change the serial
+    number scan to only look at the LAST 16 bytes rather than the first.
+    Thanks Sam Bingner (LP: #267953)
+  * [9f577ac] debian/patches/09_promise-add-offsets.patch: Added 591
+    disk offset locations for Promise RAID metadata. (ASUS M3A equipped
+    with the SB600 south bridge)
+  * [7aef2ee] debian/control: Added ${misc:Depends} in Depends
+  * [7cac457] Updated to standards version 3.8.1 (No changes needed)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sat, 14 Mar 2009 13:13:02 +0100
+
+dmraid (1.0.0.rc15-2) unstable; urgency=low
+
+  * [ac0f158] debian/dmraid-activate: Use the newly introduced -Z flag for
+    dmraid, to instruct the kernel to remove partition device nodes from array
+    member disks. This means that there is no chance of race conditions with
+    udev and creating UUID/label symbolic links either for member disk nodes,
+    or dmraid device-mapper nodes.
+
+ -- Luke Yelavich <themuso@ubuntu.com>  Fri, 20 Feb 2009 17:31:09 +0100
+
+dmraid (1.0.0.rc15-1) unstable; urgency=low
+
+  * [fc70eec] debian/patches/13_rm_partitions.patch: Make --
+    rm_partitions work with older kernels which return EINVAL when
+    trying to remove a partition with a number > 16 - Document --
+    rm_partitions in the man page
+  * [68c7ed1] Added debian/README.source
+  * Upload to unstable.
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Mon, 16 Feb 2009 13:50:55 +0100
+
+dmraid (1.0.0.rc15-1~exp7) experimental; urgency=low
+
+  [ Luke Yelavich ]
+  * [aaefbef] debian/initramfs/dmraid.initramfs-hook/dmraid: create udev
+    rules dir before copying each udev rule
+  * [fdef4bb] debian/dmraid-activate: Refactor code to allow for special
+    casing of raid groups and subsets
+  * [072319d] debian/patches/05_kernel-event-handling.patch: Drop, as
+    this was breaking RAID0 activation for all metadata types, and the kernel
+    event handling setup is present in rc15 anyway (Closes: #514798),
+    (LP: #310928)
+  * [e1f9960] debian/libdmraid-dev.links: Symlink libdmraid.so since
+    pointing to a broken symbolic link in the install file causes the
+    build to FTBFS
+
+  [ Giuseppe Iuculano ]
+  * [fdd5c72] Bump to debhelper 7 compatibility levels
+  * [5c20ceb] debian/patches/11_isw-raid10.patch: Fix mismatch between
+    BIOS and dmraid's view of ISW raid 10 sets
+  * [4fce3ee] debian/patches/13_rm_partitions.patch: patch adding
+    rm_partitions cmdline option and functionality
+  * [ff07846] debian/rules: Use dh_clean -k is deprecated, use dh_prep
+    and fix dh-clean-k-is-deprecated lintian warning
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Fri, 13 Feb 2009 09:00:09 +0100
+
+dmraid (1.0.0.rc15-1~exp6) experimental; urgency=low
+
+  * [51d68d1] debian/patches/07_isw_metadata_normal_state.patch: Fix
+    Metadata is not put in the NORMAL state after dmraid rebuild is
+    started manually
+  * [8165a84] debian/patches/08_isw_rebuild.patch: Fix ISW Metadata is
+    corrupted after rebuilding is started
+  * [0f588f5] debian/control: Fix Vcs-Browser field to play nice with
+    cl2vcs
+  * [d832984] Added libdmraid1.0.0.rc15 symbols file
+  * [f0e50b8] Added description in 07_isw_metadata_normal_state.patch
+    and 08_isw_rebuild.patch
+  * [492e108] debian/dmraid-activate: Activate unconditionally isw array
+    (LP: #310928)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Fri, 30 Jan 2009 08:40:41 +0100
+
+dmraid (1.0.0.rc15-1~exp5) experimental; urgency=low
+
+  * [f23f890] debian/patches: Deleted old patch 08_promise-metadata-
+    fixes.dpatch
+  * [db69b2c] Switch to quilt
+  * [e40b076] debian/initramfs/dmraid.initramfs-hook/dmraid: New udev in
+    Ubuntu has the default rules installed into /lib/udev/rules.d, so
+    refer also to udev rules file in /lib/udev/rules.d
+  * [fed9520] debian/dmraid-activate: Ignore case distinctions when grep
+    for "No RAID disks"
+  * [c85b78f] debian/dmraid.postinst: call udevadm with --action=change
+    (Closes: #512771), (LP: #320482)
+  * [8d88132] debian/control: Remove priority and section fields in the
+    binary package, and fix duplicate-short-description lintian warning
+  * [1fd2986] Fixed command-with-path-in-maintainer-script lintian
+    warning
+  * [36cd8e5] debian/control: Removed initramfs-tools depends
+  * [b3eb93f] debian/control: Fixed duplicate-long-description lintian
+    warning
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Fri, 23 Jan 2009 19:55:42 +0100
+
+dmraid (1.0.0.rc15-1~exp4) experimental; urgency=low
+
+  * [e41f5e6] debian/patches/10_exit_code.dpatch: Fix exit-code for "No
+    RAID disks" and "no block devices found" errors (LP: #300825)
+  * [3d0a810] debian/rules: don't create a minimal binary for udeb, some
+    features required from the installer are missing
+  * [cadad71] debian/patches/07_fix_dmraid_mini_build.dpatch: Removed
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sat, 27 Dec 2008 09:26:28 +0100
+
+dmraid (1.0.0.rc15-1~exp3) experimental; urgency=low
+
+  * switch to git
+  * debian/control:
+    + enabled LED support
+    + removed pointless configure-initramfs flavour
+  * debian/patches/06_fix_led_support_compilation.dpatch: fix FTBFS when LED
+    support is enabled
+  * debian/patches/07_fix_dmraid_mini_build.dpatch: fix FTBFS with
+    --enable-mini
+  * debian/control: create a minimal binary for udeb (--enable-mini)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Tue, 23 Dec 2008 08:52:53 +0100
+
+dmraid (1.0.0.rc15-1~exp2) experimental; urgency=low
+
+  * debian/control: 
+    + Made the long description for the udeb shorter
+    + Added initramfs-tools to dmraid Depends
+  * debian/initramfs/dmraid.initramfs-hook/dmraid: 
+    + Removed blank line added before the 'fi' in the dmraid initramfs-hook.
+    + check if 85_dmraid.rules or 85-dmraid.rules exists, and then copy it
+      (LP: #306114)
+  * debian/patches/02_raid45_to_raid4-5.dpatch: Removed
+  * debian/dmraid.postinst: initramfs-tools is in Depends, do not check for
+    update-initramfs (fixed command-with-path-in-maintainer-script lintian
+    warning)
+  * debian/dmraid-activate: modprobe also dm_raid45
+  * debian/patches/02_scsi_serial_remove_ws.dpatch: remove whitespace from
+    serial id (LP: #305011)
+  * debian/copyright: Updated
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sun, 14 Dec 2008 10:17:51 +0100
+
+dmraid (1.0.0.rc15-1~exp1) experimental; urgency=low
+
+  * New upstream release
+  * debian/control: 
+    + Added Version Control System location
+    + Create new packages, libdmraid1, libdmraid-dev and libdmraid1-udeb
+      respectively.
+    + Added Luke Yelavich <themuso@ubuntu.com> in Uploaders
+  * Removed debian/initramfs/dmraid.initramfs-local/
+  * debian/patches:
+    + Removed 06_isw-metadata-fixes.dpatch, 10_jmicron-name-fix.dpatch,
+      04_generate-uuids.dpatch, 07_isw-raid10-nested.dpatch,
+      02_raid45_toraid456.dpatch, 11_fix_segfault_on_big_endian.dpatch
+    + Added 02_raid45_to_raid4-5.dpatch
+    + Updated all patches to work with 1.0.0.rc15
+    + 04_do_not_use_p_for_partition.dpatch: Removed "p" from device name. A
+      proper upgrade script is needed before using it.
+  * debian/rules: 
+    + copy config.sub and config.guess in the right location
+    + fix mandir location
+    + added --enable-shared_lib in configure
+    + Support cross-compiling
+  * Install dmraid-activate also in dmraid-udeb package
+  * debian/patches/01_fix_broken_linking.dpatch:
+    + Create correct symbolic links when building a shared library.
+    + libdmraid should be linked against libdevmapper when building the shared
+      library, not the dmraid executable.
+  * debian/initramfs/dmraid.initramfs-hook/dmraid: Use force_load instead of
+    manual_add_modules
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sat, 19 Nov 2008 21:10:18 +0100
+
+dmraid (1.0.0.rc14-6) unstable; urgency=low
+
+  * debian/rules: Added execution rights to
+    /usr/share/initramfs-tools/scripts/local-top/dmraid
+  * debian/patches/02_raid45_toraid456.dpatch: Remove, this not fix #411172
+    and the new dm-raid45 (not yet in Debian) is using the target that the
+    dmraid code originally expected.
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Thu, 06 Nov 2008 08:50:02 +0100
+
+dmraid (1.0.0.rc14-5) unstable; urgency=low
+
+  * debian/control: dmraid and dmraid-udeb should depend on dmsetup and
+    dmsetup-udeb respecitvely, to ensure UUID symlinks are correctly created.
+  * Place a script in the local-top directory of the initramfs, to catch any
+    arrays that have not been activated by udev and vol_id. This is because
+    vol_id does not yet have knowledge of newer array metadata. Thanks to Luke
+    Yelavich <themuso@ubuntu.com> (Workaround for #500883)
+  * Removed pointless debian/initramfs/dmraid.initramfs-local directory
+  * debian/patches/12_support_virtio_devices.dpatch: Check virtio devices for
+    dmraid metadata, patch thanks to Colin Watson <cjwatson@ubuntu.com>.
+  * Fixed a typo in the previous changelog entry
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Wed, 22 Oct 2008 01:13:55 +0200
+
+dmraid (1.0.0.rc14-4) unstable; urgency=high
+
+  * debian/dmraid.postinst: Activate existing arrays once the package is
+    installed. (Closes: #498674). Thanks to Luke Yelavich <themuso@ubuntu.com>
+  * debian/patches/00list: Removed 07_isw-raid10-nested.dpatch, it breaks some
+    Intel raid1 system (Closes: #494278)
+  * debian/dmraid.udev: watershed isn't in udev package, removed from RUN
+    command 
+  * Do not install useless usr/share/initramfs-tools/scripts/local-top
+  * debian/dmraid-activate: Don't take out any locks, added -i
+    (--ignorelocking) option in every dmraid command executed by
+    dmraid-activate, and do not use /usr/bin/basename, it is pointless and
+    breaks fakeraid detection if /usr isn't mounted (Closes: 499060)
+  * debian/control: Removed lsb-base and added udev in dmraid Depends
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sun, 21 Sep 2008 15:54:38 +0200
+
+dmraid (1.0.0.rc14-3) unstable; urgency=low
+
+  * debian/patches/09_promise-add-offsets.dpatch: Added 974 disk offset
+    locations for Promise RAID metadata. (Closes: #489972)
+  * Run update-initramfs in postrm
+  * debian/control: Dropped zlib1g-dev build dependency.
+  * Merge from Ubuntu debian/dmraid.udev: Udev rule to allow dmraid arrays to
+    be brought up in the event that the member disks of an array are present.
+  * debian/dmraid.init: Drop, udev helps us start dmraid arrays now.
+    (Closes: #394399)
+  * Merge from Ubuntu debian/dmraid-activate: Script to reformat the output of
+    dmraid to be useful with udev (Do not install in udeb)
+  * debian/initramfs/dmraid.initramfs-hook/dmraid: Added dmraid-activate, new
+    udev rule needs it
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Sun, 31 Aug 2008 14:51:38 +0200
+
+dmraid (1.0.0.rc14-2) unstable; urgency=low
+
+  * Merge the following patch from Ubuntu (thanks to Luke Yelavich):
+    + 04_generate-uuids.dpatch, Generate UUIDs with DMRAID prefix.
+      (Closes: #489967)
+    + 05_kernel-event-handling.dpatch, Add support for kernel driver event
+      handling support. (Closes: #489968)
+    + 06_isw-metadata-fixes.dpatch, Intel Software RAID metadata fixes.
+      (Closes: #489969)
+    + 07_isw-raid10-nested.dpatch, Add RAID10(0+1) nested RAID level support
+      for Intel Software RAID. (Closes: #489970)
+    + 08_promise-metadata-fixes.dpatch, Promise metadata fixes.
+      (Closes: #489971)
+    + 09_promise-add-offsets.dpatch, Add extra offsets where promise metadata
+      can be found. (Closes: #489972)
+    + 10_jmicron-name-fix.dpatch, Fix segfault when attempting to generate
+      name for jmicron controllers. (Closes: #489973)
+  * Added 11_fix_segfault_on_big_endian.dpatch (via upstream), it fixes a
+    segfault on big-endian platforms (ppc)
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Wed, 09 Jul 2008 09:26:32 +0200
+
+dmraid (1.0.0.rc14-1) unstable; urgency=low
+
+  * New upstream release (Closes: #450809)
+  * New maintainer, thanks to Utnubu Team for the prior work on dmraid
+    (Closes: #459593)
+  * Switch to dpatch
+    - 01_statically_link_against_libz.dpatch (merged)
+    - 02_raid45_toraid456.dpatch Change raid45 target to raid456
+      (Closes: #411172)
+    - 03_fix_hyphen-used-as-minus-sign.dpatch 
+  * lintian cleaned:
+    - Calling dh_installdeb after dh_shlibdeps
+    - Added autotools-dev to Build-Depends, and fix
+      outdated-autotools-helper-file
+    - Added watch file
+    - Fix old-fsf-address-in-copyright-file
+    - Fix init.d-script-missing-lsb-short-description
+    - Updated to standards version 3.8.0
+  * debian/dmraid.init: Check if /etc/default/rcS exists before sourcing it
+  * debian/rules: Using dh_install instead of cp for installing initrams
+
+ -- Giuseppe Iuculano <giuseppe@iuculano.it>  Tue, 24 Jun 2008 10:17:33 +0200
+
+dmraid (1.0.0.rc13-2.1) unstable; urgency=low
+
+  * Non-maintainer upload to solve release goal.
+  * Add LSB dependency header to init.d scripts (Closes: #458626)
+
+ -- Petter Reinholdtsen <pere@debian.org>  Tue, 18 Mar 2008 17:57:38 +0100
+
+dmraid (1.0.0.rc13-2) unstable; urgency=high
+
+  * Apply patch to link libz statically, but only that; works only with GNU
+    linker, and might break full static linking in the future; thanks Steve
+    Langasek; catched by Frederic Briere; closes: #396762.
+
+ -- Loic Minier <lool@dooz.org>  Sun,  5 Nov 2006 17:08:55 +0100
+
+dmraid (1.0.0.rc13-1) unstable; urgency=low
+
+  * New upstream release; closes: #391499.
+    - Update copyright years and copyright holders.
+    - Update version in debian/rules.
+    - Supports some new NVIDIA RAID arrays; closes: #391125.
+    - Add a zlib1g-dev build-dep.
+    - Configure the standard flavour with --enable-libselinux
+      --enable-libsepol.
+  * Merge diff from 0.9.9+1.0.0.rc9-3.1 NMU; acknowledge NMU; thanks
+    Jonathan McDowell; closes: #367796, #367661.
+  * Add myself as Uploaders.
+  * Compute upstream version with dpkg-parsechangelog instead of hardcoding
+    it.
+  * Use $(CURDIR) instead of $(shell pwd).
+  * Fix bashisms; thanks Julien Danjou; closes: #374480.
+  * Pass --mandir to configure relative to ${prefix}; pass an absolute DESTDIR
+    to make install.
+  * Bump up Debhelper compatibility level to 5; partially addresses #375413.
+  * Bump up Standards-Version to 3.7.2.
+  * Build a new udeb flavour, configured without selinux and sepol;
+    closes: #375413.
+  * Add a .PHONY definition; create the list of configure-$flavour targets
+    dynamically; misc cleanups.
+
+ -- Loic Minier <lool@dooz.org>  Sun, 29 Oct 2006 12:01:36 +0100
+
+dmraid (0.9.9+1.0.0.rc9-3.1) unstable; urgency=low
+
+  * NMU with permission.
+  * Move init script from 03 to 04 to ensure we run after udev.
+    (Closes: #367796)
+  * Include the initramfs hook and script contributed by Tormod Volden,
+    so dmraid can integrate effortlessly (closes: launchpad.net/22107)
+    (Closes: #367661)
+
+ -- Jonathan McDowell <noodles@earth.li>  Mon, 24 Jul 2006 18:49:11 +0100
+
+dmraid (0.9.9+1.0.0.rc9-3) unstable; urgency=low
+
+  * add dmraid-udeb by popular request, looking forward for d-i integration
+    (Closes: #350250)
+
+ -- Filippo Giunchedi <filippo@debian.org>  Sat, 11 Feb 2006 13:25:55 +0100
+
+dmraid (0.9.9+1.0.0.rc9-2) unstable; urgency=low
+
+  * fix Description: to a more accurate one this closes: #334805 and correctly
+    indent the item list (closes: #334855)
+  * fix copyright file with additional informations as per policy 12.5
+    (closes: #334856)
+  * add CHANGELOG to dh_installchangelogs
+
+ -- Filippo Giunchedi <filippo@debian.org>  Thu, 20 Oct 2005 22:12:42 +0200
+
+dmraid (0.9.9+1.0.0.rc9-1) unstable; urgency=low
+
+  * upload to debian on behalf of the utnubu team (closes: #306257)
+
+ -- Filippo Giunchedi <filippo@debian.org>  Sun, 16 Oct 2005 13:22:24 +0200
+
+dmraid (0.9.9+1.0.0.rc9-0ubuntu1) breezy; urgency=low
+
+  * New upstream releasse with tons of fixes.
+
+  * Drop all our local patches (merged by upstream).
+
+ -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Mon, 26 Sep 2005 06:57:21 +0200
+
+dmraid (0.9.9+1.0.0.rc8-0ubuntu1) breezy; urgency=low
+
+  * First release.
+
+  * Fix aclocal.m4 to cope properly with --enable-klibc/--disable-klibc.
+
+  * Fix make.tmpl.in to be very loud when building with klibc.
+
+  * Fix make.tmpl.in to understand $(DESTDIR) for mandir and infodir.
+
+  * Fix missing ] in lib/format/ataraid/pdc.c to compile on bigendian
+    machines.
+
+  * Run init script before mdadm-raid and lvm and stop after.
+
+ -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Thu, 22 Sep 2005 06:56:24 +0200
--- dmraid-1.0.0.rc16.orig/debian/libdmraid1.0.0.rc16.symbols
+++ dmraid-1.0.0.rc16/debian/libdmraid1.0.0.rc16.symbols
@@ -0,0 +1,53 @@
+libdmraid.so.1.0.0.rc16 libdmraid1.0.0.rc16 #MINVER#
+ Base@Base 1.0.0.rc16
+ _dbg_free@Base 1.0.0.rc16
+ _dbg_malloc@Base 1.0.0.rc16
+ _dbg_realloc@Base 1.0.0.rc16
+ _dbg_strdup@Base 1.0.0.rc16
+ add_delimiter@Base 1.0.0.rc16
+ add_dev_to_array@Base 1.0.0.rc16
+ change_set@Base 1.0.0.rc16
+ check_valid_format@Base 1.0.0.rc16
+ count_devices@Base 1.0.0.rc16
+ count_devs@Base 1.0.0.rc16
+ count_sets@Base 1.0.0.rc16
+ delete_raidsets@Base 1.0.0.rc16
+ discover_devices@Base 1.0.0.rc16
+ discover_partitions@Base 1.0.0.rc16
+ discover_raid_devices@Base 1.0.0.rc16
+ display_devices@Base 1.0.0.rc16
+ display_set@Base 1.0.0.rc16
+ dm_version@Base 1.0.0.rc16
+ dso_end_rebuild@Base 1.0.0.rc16
+ dso_get_members@Base 1.0.0.rc16
+ erase_metadata@Base 1.0.0.rc16
+ find_set@Base 1.0.0.rc16
+ get_dm_type@Base 1.0.0.rc16
+ get_set_name@Base 1.0.0.rc16
+ get_set_type@Base 1.0.0.rc16
+ get_status@Base 1.0.0.rc16
+ get_type@Base 1.0.0.rc16
+ group_set@Base 1.0.0.rc16
+ hot_spare_add@Base 1.0.0.rc16
+ init_locking@Base 1.0.0.rc16
+ lc_inc_opt@Base 1.0.0.rc16
+ lc_list@Base 1.0.0.rc16
+ lc_opt@Base 1.0.0.rc16
+ lc_stralloc_opt@Base 1.0.0.rc16
+ lc_strcat_opt@Base 1.0.0.rc16
+ lib_perform@Base 1.0.0.rc16
+ libdmraid_date@Base 1.0.0.rc16
+ libdmraid_exit@Base 1.0.0.rc16
+ libdmraid_init@Base 1.0.0.rc16
+ libdmraid_make_table@Base 1.0.0.rc16
+ libdmraid_version@Base 1.0.0.rc16
+ list_formats@Base 1.0.0.rc16
+ lock_resource@Base 1.0.0.rc16
+ log_alloc_err@Base 1.0.0.rc16
+ plog@Base 1.0.0.rc16
+ process_sets@Base 1.0.0.rc16
+ rebuild_raidset@Base 1.0.0.rc16
+ remove_delimiter@Base 1.0.0.rc16
+ remove_white_space@Base 1.0.0.rc16
+ total_sectors@Base 1.0.0.rc16
+ unlock_resource@Base 1.0.0.rc16
--- dmraid-1.0.0.rc16.orig/debian/dmraid.bug
+++ dmraid-1.0.0.rc16/debian/dmraid.bug
@@ -0,0 +1,88 @@
+#!/bin/bash
+#
+# dmraid bug submission control script
+#
+# allows Debian's bug tools to include relevant information in bug reports.
+#
+# based on mdadm bug submission control script
+#
+set +eu
+
+if ! command -v yesno >/dev/null; then
+  if [ -r /usr/share/reportbug/handle_bugscript ]; then
+    exec /usr/share/reportbug/handle_bugscript ". $0" /dev/stdout
+  fi
+  yesno() {
+    read -n1 -p"$1" REPLY
+    case "$REPLY" in
+      [yY]) REPLY=yep;;
+      [nN]) REPLY=nop;;
+      ('') REPLY="$2";;
+    esac
+  }
+  exec 3>&1
+fi
+
+root=$(id -u)
+
+echo "--- dmraid -r -vvv output" >&3
+if ! [ "$root" = "0" ] ;then
+	echo "Only root can run dmraid -r -vvv, please type the root password"
+	su root -c "dmraid -r -vvv" >&3
+else
+	dmraid -r -vvv >&3
+fi
+
+echo >&3
+
+
+echo "--- dmraid -s -vv output" >&3
+if ! [ "$root" = "0" ] ;then
+	echo "Only root can run dmraid -s -vv, please type the root password"
+	su root -c "dmraid -s -vv" >&3
+else
+	dmraid -s -vv >&3
+fi
+echo >&3
+
+echo "--- /proc/partitions:" >&3
+cat /proc/partitions >&3 2>&3 || :
+echo >&3
+
+echo "--- initrd.img-$(uname -r):" >&3
+if [ -r /boot/initrd.img-$(uname -r) ]; then
+  zcat /boot/initrd.img-$(uname -r) 2>&3 | cpio -t 2>&3 | egrep '/md[a/]' >&3
+fi
+echo >&3
+
+if [ -r /proc/modules ]; then
+  echo "--- /proc/modules:" >&3
+  grep 'dm_' < /proc/modules >&3 || :
+  echo >&3
+fi
+
+if [ -r /proc/cmdline ]; then
+  echo "--- /proc/cmdline" >&3
+  cat /proc/cmdline >&3
+  echo >&3
+fi
+
+if [ -f /boot/grub/menu.lst ]; then
+  echo "--- grub:" >&3
+  if [ -r /boot/grub/menu.lst ]; then
+    grep '^[^#].*root=' /boot/grub/menu.lst >&3 || :
+  else
+    echo menu.lst file not readable. >&3
+  fi
+  echo >&3
+fi
+
+if [ -f /etc/lilo.conf ]; then
+  echo "--- lilo:" >&3
+  if [ -r /etc/lilo.conf ]; then
+    egrep '^([^#].*)?root=' /etc/lilo.conf >&3 || :
+  else
+    echo lilo.conf file not readable. >&3
+  fi
+  echo >&3
+fi
--- dmraid-1.0.0.rc16.orig/debian/dmraid.postinst
+++ dmraid-1.0.0.rc16/debian/dmraid.postinst
@@ -0,0 +1,30 @@
+#! /bin/sh
+
+set -e
+
+
+case "$1" in
+  configure)
+    if command -v update-initramfs >/dev/null 2>&1; then
+	    update-initramfs -u
+    fi
+    # Activate existing arrays now.
+    udevadm trigger --subsystem-match=block --action=change
+
+    if [ -f /etc/init.d/dmraid ]; then
+  	update-rc.d -f dmraid remove
+	rm -f /etc/init.d/dmraid
+    fi
+  ;;
+  abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- dmraid-1.0.0.rc16.orig/debian/control
+++ dmraid-1.0.0.rc16/debian/control
@@ -0,0 +1,84 @@
+Source: dmraid
+Section: admin
+Priority: optional
+Maintainer: Giuseppe Iuculano <iuculano@debian.org>
+Uploaders: Luke Yelavich <themuso@ubuntu.com>
+Standards-Version: 3.8.3
+Build-Depends: debhelper (>= 7), libdevmapper-dev, libklibc-dev, libselinux1-dev, quilt (>= 0.40), autotools-dev
+Vcs-git: git://git.debian.org/git/users/derevko-guest/dmraid.git
+Vcs-Browser: http://git.debian.org/?p=users/derevko-guest/dmraid.git
+Homepage: http://people.redhat.com/~heinzm/sw/dmraid/
+
+Package: dmraid
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, udev, dmsetup
+Description: Device-Mapper Software RAID support tool
+ dmraid discovers, activates, deactivates and displays properties
+ of software RAID sets (eg, ATARAID) and contained DOS partitions.
+ .
+ dmraid uses the Linux device-mapper to create devices with respective
+ mappings for the ATARAID sets discovered.
+ .
+ The following formats are supported: 
+  Highpoint HPT37X/HPT45X
+  Intel Software RAID
+  LSI Logic MegaRAID 
+  NVidia NForce RAID (nvraid)
+  Promise FastTrack 
+  Silicon Image(tm) Medley(tm)
+  VIA Software RAID 
+ .
+ Please read the documentation in /usr/share/doc/dmraid BEFORE attempting
+ any use of this software. Improper use can cause data loss!
+
+Package: dmraid-udeb
+Architecture: any
+Section: debian-installer
+XC-Package-Type: udeb
+Depends: ${shlibs:Depends}, dmsetup-udeb
+Description: Device-Mapper Software RAID support tool (udeb)
+ dmraid discovers, activates, deactivates and displays properties
+ of software RAID sets (eg, ATARAID) and contained DOS partitions.
+ .
+ This is the minimal package (udeb) used by debian-installer
+
+Package: libdmraid1.0.0.rc16-udeb
+Architecture: any
+Section: debian-installer
+XC-Package-Type: udeb
+Depends: ${shlibs:Depends}
+Description: Device-Mapper Software RAID support tool - shared library (udeb)
+ dmraid discovers, activates, deactivates and displays properties
+ of software RAID sets (eg, ATARAID) and contained DOS partitions.
+ .
+ This is the minimal package (udeb shared library) used by debian-installer
+
+Package: libdmraid1.0.0.rc16
+Architecture: any
+Section: libs
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Replaces: libdmraid1.0.0.rc15 (<< 1.0.0.rc16-1)
+Description: Device-Mapper Software RAID support tool - shared library
+ dmraid discovers, activates, deactivates and displays properties
+ of software RAID sets (eg, ATARAID) and contained DOS partitions.
+ .
+ dmraid uses the Linux device-mapper to create devices with respective
+ mappings for the ATARAID sets discovered.
+ .
+ This package contains the dmraid shared library, which implements
+ the back half of dmraid, including on-disk metadata formats.
+
+Package: libdmraid-dev
+Architecture: any
+Section: libdevel
+Depends: libdmraid1.0.0.rc16 (= ${binary:Version}), ${misc:Depends}
+Description: Device-Mapper Software RAID support tool - header files
+ dmraid discovers, activates, deactivates and displays properties
+ of software RAID sets (eg, ATARAID) and contained DOS partitions.
+ .
+ dmraid uses the Linux device-mapper to create devices with respective
+ mappings for the ATARAID sets discovered.
+ .
+ This package contains the header files needed to link programs against
+ dmraid.
+
--- dmraid-1.0.0.rc16.orig/debian/dmraid.udev
+++ dmraid-1.0.0.rc16/debian/dmraid.udev
@@ -0,0 +1,6 @@
+# This file causes drives with dmraid arrays to be checked, and if all
+# drives are present, brought up.
+# See udev(8) for syntax
+
+SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_TYPE}=="disk", ENV{ID_FS_USAGE}=="raid", KERNEL=="hd[a-z]|sd[a-z]", \
+	RUN+="/sbin/dmraid-activate %k"
--- dmraid-1.0.0.rc16.orig/debian/dmraid.install
+++ dmraid-1.0.0.rc16/debian/dmraid.install
@@ -0,0 +1,5 @@
+debian/initramfs/dmraid.initramfs-hook/dmraid usr/share/initramfs-tools/hooks
+debian/initramfs/dmraid.initramfs-local-top/dmraid usr/share/initramfs-tools/scripts/local-top
+debian/standard/sbin/dmraid sbin
+debian/standard/usr/share/man usr/share
+debian/dmraid-activate sbin
--- dmraid-1.0.0.rc16.orig/debian/libdmraid1.0.0.rc16.install
+++ dmraid-1.0.0.rc16/debian/libdmraid1.0.0.rc16.install
@@ -0,0 +1 @@
+debian/standard/lib/*.so.* lib
--- dmraid-1.0.0.rc16.orig/debian/rules
+++ dmraid-1.0.0.rc16/debian/rules
@@ -0,0 +1,100 @@
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+# export DH_VERBOSE=1
+
+include /usr/share/quilt/quilt.make
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE))
+CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
+else
+CROSS= --build $(DEB_BUILD_GNU_TYPE)
+endif
+
+version := $(shell dpkg-parsechangelog | sed -ne 's/^Version: \(.*\)-[^-]*$$/\1/p')
+buildroot := $(CURDIR)/debian/build
+flavours := standard udeb
+
+common-config-flags := $(CROSS) --prefix=/usr --exec-prefix=/
+
+methods: methods-stamp
+methods-stamp:
+	dh_testdir
+	mkdir -p ${buildroot}
+	cp -f /usr/share/misc/config.sub 1.0.0.rc16/autoconf/config.sub
+	cp -f /usr/share/misc/config.guess 1.0.0.rc16/autoconf/config.guess
+	for i in ${flavours}; do cp -rp ${version} ${buildroot}/$$i; done
+	touch $@
+
+configure-standard: methods configure-standard-stamp
+configure-standard-stamp:
+	dh_testdir
+	cd ${buildroot}/standard && \
+	./configure ${common-config-flags} --disable-klibc --enable-libselinux --enable-libsepol --enable-shared_lib --enable-led --enable-intel_led
+	touch $@
+
+configure-udeb: methods configure-udeb-stamp
+configure-udeb-stamp:
+	dh_testdir
+	cd ${buildroot}/udeb && \
+	./configure ${common-config-flags} --disable-libselinux --disable-libsepol --enable-shared_lib
+	touch $@
+
+configure: methods configure-stamp
+configure-stamp: $(addprefix configure-, $(flavours))
+	dh_testdir
+	touch $@
+
+build: $(QUILT_STAMPFN) configure build-stamp
+build-stamp:
+	dh_testdir
+	for i in ${flavours}; do cd ${buildroot}/$$i && make; done
+	touch $@
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_prep
+	cd ${buildroot}/standard && make DESTDIR=$(CURDIR)/debian/standard install
+	cd ${buildroot}/udeb && make DESTDIR=$(CURDIR)/debian/udeb install
+	rm -rf debian/udeb/usr
+	dh_link
+
+binary-arch: install
+	dh_testdir
+	dh_testroot
+	dh_install
+	dh_installdirs
+	dh_installudev --priority=85
+	dh_installdocs ${version}/CREDITS ${version}/KNOWN_BUGS ${version}/README ${version}/TODO
+	dh_installchangelogs ${version}/CHANGELOG
+	install -m0755 debian/dmraid.bug debian/dmraid/usr/share/bug/dmraid/script
+	chmod 755 debian/dmraid/usr/share/initramfs-tools/hooks/dmraid
+	chmod 755 debian/dmraid/usr/share/initramfs-tools/scripts/local-top/dmraid
+	chmod 755 debian/dmraid/sbin/dmraid-activate
+	dh_strip -a
+	dh_compress -a
+	dh_fixperms -a
+	dh_makeshlibs -a --add-udeb 'libdmraid1.0.0.rc16-udeb' -V
+	dh_shlibdeps -a
+	dh_installdeb -a
+	dh_gencontrol -a
+	dh_md5sums -a
+	dh_builddeb -a
+
+binary-indep: install
+	# nothing to do
+
+binary: binary-arch binary-indep
+
+clean: unpatch
+	dh_testdir
+	dh_testroot
+	dh_clean
+	rm -f *-stamp
+	rm -rf debian/build debian/standard debian/udeb
+.PHONY: clean binary binary-indep binary-arch install build configure methods $(addprefix configure-, $(flavours))
--- dmraid-1.0.0.rc16.orig/debian/patches/04_do_not_use_p_for_partition.patch
+++ dmraid-1.0.0.rc16/debian/patches/04_do_not_use_p_for_partition.patch
@@ -0,0 +1,13 @@
+Author: Giuseppe Iuculano <giuseppe@iuculano.it>
+Description: Removed "p" from device name. A proper upgrade script is needed before using it.
+--- a/1.0.0.rc16/lib/format/partition/dos.c
++++ b/1.0.0.rc16/lib/format/partition/dos.c
+@@ -31,7 +31,7 @@ _name(struct lib_context *lc, struct rai
+ {
+ 	const char *base = get_basename(lc, rd->di->path);
+ 
+-	return type ? snprintf(str, len, "%s%s%u", base, OPT_STR_PARTCHAR(lc),
++	return type ? snprintf(str, len, "%s%u", base,
+ 			       partition) : snprintf(str, len, "%s", base);
+ }
+ 
--- dmraid-1.0.0.rc16.orig/debian/patches/series
+++ dmraid-1.0.0.rc16/debian/patches/series
@@ -0,0 +1,12 @@
+01_fix_broken_linking.patch
+02_disable_dmreg.patch
+03_fix_hyphen-used-as-minus-sign.patch
+04_do_not_use_p_for_partition.patch
+09_promise-add-offsets.patch
+10_exit_code.patch
+12_support_virtio_devices.patch
+17_isw-probe-hpa.patch
+15_activate_multiple_raid_sets.patch
+18_pdc_raid10_failure..patch
+19_ddf1_lsi_persistent_name.patch
+20_fix_isw_sectors_calculation.patch
--- dmraid-1.0.0.rc16.orig/debian/patches/19_ddf1_lsi_persistent_name.patch
+++ dmraid-1.0.0.rc16/debian/patches/19_ddf1_lsi_persistent_name.patch
@@ -0,0 +1,20 @@
+Using a dummy string for the timestamp in the LSI metadata
+--- a/1.0.0.rc16/lib/format/ddf/ddf1.c
++++ b/1.0.0.rc16/lib/format/ddf/ddf1.c
+@@ -696,6 +696,16 @@ name(struct lib_context *lc, struct ddf1
+ 			sprintf(b, "%02x%02x%02x%02x",
+ 				vd->guid[i], vd->guid[i + 1],
+ 				vd->guid[i + 2], vd->guid[i + 3]);
++
++		/*
++		 * Because the LSI bios changes the timestamp in the
++		 * metadata on every boot, we have to neutralize it
++		 * in order to allow for persistent names.
++		 *
++		 * Using a dummy string "47114711" for that.
++		 */
++		if (!strncmp((char *) vd->guid, "LSI", 3))
++			strncpy(buf + prefix + 32, "47114711", 8);
+ 	}
+ 
+ out:
--- dmraid-1.0.0.rc16.orig/debian/patches/02_disable_dmreg.patch
+++ dmraid-1.0.0.rc16/debian/patches/02_disable_dmreg.patch
@@ -0,0 +1,134 @@
+Disabled all dmreg stuff
+--- a/1.0.0.rc16/lib/Makefile.in
++++ b/1.0.0.rc16/lib/Makefile.in
+@@ -45,10 +45,6 @@ SOURCES=\
+ 	format/ddf/ddf1_dump.c \
+ 	format/partition/dos.c
+ 
+-ifeq ("@STATIC_LINK@", "no")
+-	SOURCES += register/dmreg.c
+-endif
+-
+ OBJECTS=$(SOURCES:%.c=%.o)
+ 
+ LIB_STATIC=$(top_srcdir)/lib/libdmraid.a
+@@ -63,8 +59,8 @@ ifeq ("@KLIBC@", "no")
+ 	ifeq ("@STATIC_LINK@", "no")
+ 		LIB_SHARED=$(top_srcdir)/lib/libdmraid.so
+ 		LIB_EVENTS_SHARED=$(top_srcdir)/lib/$(LIB_EVENTS_NAME).so
+-		TARGETS += $(LIB_SHARED) $(LIB_EVENTS_SHARED)
+-		INSTALL_TARGETS += $(LIB_SHARED) $(LIB_EVENTS_SHARED)
++		TARGETS += $(LIB_SHARED)
++		INSTALL_TARGETS += $(LIB_SHARED)
+ 		ifeq ("@DIETLIBC@", "yes")
+ 			LIBDMRAIDLIBS += -ldevmapper_dietc
+ 		else
+--- a/1.0.0.rc16/make.tmpl.in
++++ b/1.0.0.rc16/make.tmpl.in
+@@ -137,7 +137,7 @@ $(TARGETS): $(OBJECTS)
+ 
+ %.so: $(OBJECTS)
+ 	$(CC) -shared -Wl,-soname,$(notdir $@).$(DMRAID_LIB_VERSION) \
+-	-Wl,--version-script,.export.sym $(OBJECTS) $(LIBDMRAIDLIBS) -o $@ -ldevmapper-event
++	-Wl,--version-script,.export.sym $(OBJECTS) $(LIBDMRAIDLIBS) -o $@
+ 
+ $(LIB_STATIC): $(OBJECTS)
+ 	$(RM) $@
+--- a/1.0.0.rc16/tools/Makefile.in
++++ b/1.0.0.rc16/tools/Makefile.in
+@@ -22,12 +22,6 @@ TARGETS=\
+ 
+ include $(top_srcdir)/make.tmpl
+ 
+-ifeq ("@KLIBC@", "no")
+-	ifeq ("@STATIC_LINK@", "no")
+-		TARGETS += dmevent_tool
+-	endif
+-endif
+-
+ DMRAIDLIBS=-ldmraid
+ 
+ ifeq ("@KLIBC@", "yes")
+@@ -37,16 +31,10 @@ else
+ 		ifeq ("@LIB_SO@", "no")
+ 			DMRAIDLIBS += -ldevmapper_dietc
+ 		endif
+-		ifeq ("@STATIC_LINK@", "no")
+-			DMEVENTTOOLLIBS = -ldevmapper-event_dietc
+-		endif
+ 	else
+ 		ifeq ("@LIB_SO@", "no")
+ 			DMRAIDLIBS += -ldevmapper
+ 		endif
+-		ifeq ("@STATIC_LINK@", "no")
+-			DMEVENTTOOLLIBS = -ldevmapper-event
+-		endif
+ 	endif
+ 
+ 	ifeq ("@LIBSELINUX@", "yes")
+--- a/1.0.0.rc16/lib/.export.sym
++++ b/1.0.0.rc16/lib/.export.sym
+@@ -52,8 +52,6 @@ Base {

+ 		dso_end_rebuild;

+ 		hot_spare_add;

+ 		dso_get_members;

+-		dm_register_device;

+-		dm_unregister_device;
+ 		dm_all_monitored;
+ 	local:

+ 		*;

+--- a/1.0.0.rc16/lib/activate/activate.c
++++ b/1.0.0.rc16/lib/activate/activate.c
+@@ -849,18 +849,12 @@ enum dm_what { DM_ACTIVATE, DM_REGISTER 
+ static int
+ dm_register_for_event(char *dev_name, char *lib_name)
+ {
+-#ifdef	DMRAID_AUTOREGISTER
+-	dm_register_device(dev_name, lib_name);
+-#endif
+ 	return 1;
+ }
+ 
+ static int
+ dm_unregister_for_event(char *dev_name, char *lib_name)
+ {
+-#ifdef	DMRAID_AUTOREGISTER
+-	dm_unregister_device(dev_name, lib_name);
+-#endif
+ 	return 1;
+ }
+ 
+@@ -874,6 +868,8 @@ do_device(struct lib_context *lc, struct
+ 	if (OPT_TEST(lc))
+ 		return 1;
+ 
++	return 1;
++
+         struct dmraid_format *fmt = get_format(rs);
+ 
+         if (fmt->name != NULL) {
+--- a/1.0.0.rc16/lib/metadata/reconfig.c
++++ b/1.0.0.rc16/lib/metadata/reconfig.c
+@@ -242,20 +242,16 @@ add_dev_to_raid(struct lib_context *lc, 
+ 		 * metadata on disks to OK state.
+ 		 */
+ 		/* Create lib-events library name */
+-		if (fmt->name) {
++		/*if (fmt->name) {
+ 			strncpy(lib_name, "libdmraid-events-", LIB_NAME_LENGTH);
+ 			strncat(lib_name, fmt->name,
+ 				LIB_NAME_LENGTH-strlen(fmt->name)-3);
+ 			strncat(lib_name, ".so", 3);
+ 		} else
+ 			goto err;
+-
+-		/* Check registration */
+-		if (!dm_monitored_events(&pending, sub_rs->name, lib_name)) {
+-			/* If NOT registered update metadata to OK state. */
++*/
+ 			if (check_rd->fmt->metadata_handler)
+ 				check_rd->fmt->metadata_handler(lc, UPDATE_REBUILD_STATE, NULL, (void *) rs);
+-		}
+ 	}
+ #endif
+ 
--- dmraid-1.0.0.rc16.orig/debian/patches/03_fix_hyphen-used-as-minus-sign.patch
+++ dmraid-1.0.0.rc16/debian/patches/03_fix_hyphen-used-as-minus-sign.patch
@@ -0,0 +1,291 @@
+Author: Giuseppe Iuculano <giuseppe@iuculano.it>
+Description: Fix hyphen-used-as-minus-sign
+--- a/1.0.0.rc16/man/dmraid.8
++++ b/1.0.0.rc16/man/dmraid.8
+@@ -4,20 +4,20 @@ dmraid \- discover, configure and activa
+ .SH SYNOPSIS
+ .B dmraid
+  {-a|--activate} {y|n|yes|no} 
+- [-d|--debug]... [-v|--verbose]... [-i|--ignorelocking]
+- [-f|--format FORMAT[,FORMAT...]]
++ [\-d|--debug]... [\-v|--verbose]... [\-i|--ignorelocking]
++ [\-f|--format FORMAT[,FORMAT...]]
+  [{-P|--partchar} CHAR]
+- [-p|--no_partitions]
+- [-Z|--rm_partitions]
++ [\-p|--no_partitions]
++ [\-Z|--rm_partitions]
+  [--separator SEPARATOR]
+- [-t|--test]
++ [\-t|--test]
+  [RAID-set...]
+ 
+ .B dmraid
+  {-b|--block_devices}
+- [-c|--display_columns][FIELD[,FIELD...]]...
+- [-d|--debug]... [-v|--verbose]...
+- [--separator SEPARATOR]
++ [\-c|--display_columns][FIELD[,FIELD...]]...
++ [\-d|--debug]... [\-v|--verbose]...
++ [\--separator SEPARATOR]
+  [device-path...]
+ 
+ .B dmraid
+@@ -25,60 +25,60 @@ dmraid \- discover, configure and activa
+ 
+ .B dmraid
+  {-l|--list_formats}
+- [-d|--debug]... [-v|--verbose]...
++ [\-d|--debug]... [\-v|--verbose]...
+ 
+ .B dmraid
+  {-n|--native_log}
+- [-d|--debug]... [-v|--verbose]... [-i|--ignorelocking]
+- [-f|--format FORMAT[,FORMAT...]]
+- [--separator SEPARATOR]
++ [\-d|--debug]... [\-v|--verbose]... [\-i|--ignorelocking]
++ [\-f|--format FORMAT[,FORMAT...]]
++ [\--separator SEPARATOR]
+  [device-path...]
+ 
+ .B dmraid
+- {-R| --rebuild}
++ {-R| \--rebuild}
+  RAID-set
+  [device-path]
+ 
+ .B dmraid
+- {-x| --remove}
++ {-x| \--remove}
+  [RAID-set]
+ 
+ .B dmraid
+- -f FORMAT-handler
+-{-C| --create} set 
+- --type raidlevel
+- [--size=setsize --strip stridesize] 
+- --disk "device-path, device-path [, device-path ...]"
++ \-f FORMAT-handler
++{-C| \--create} set 
++ \--type raidlevel
++ [\--size=setsize \--strip stridesize] 
++ \--disk "device-path, device-path [, device-path ...]"
+ 
+ .B dmraid
+-[ -f|--format FORMAT-handler]
+--S|--spare [RAID-set]
+--M|--media  "device-path"
++[ \-f|--format FORMAT-handler]
++\-S|--spare [RAID-set]
++\-M|--media  "device-path"
+ 
+ .B dmraid
+  {-r|--raid_devices}
+- [-c|--display_columns][FIELD[,FIELD...]]...
+- [-d|--debug]... [-v|--verbose]... [-i|--ignorelocking]
+- [-D|--dump_metadata]
+- [-f|--format FORMAT[,FORMAT...]]
+- [--separator SEPARATOR]
++ [\-c|--display_columns][FIELD[,FIELD...]]...
++ [\-d|--debug]... [\-v|--verbose]... [\-i|--ignorelocking]
++ [\-D|--dump_metadata]
++ [\-f|--format FORMAT[,FORMAT...]]
++ [\--separator SEPARATOR]
+  [device-path...]
+ 
+ .B dmraid
+  {-r|--raid_devices}
+- [-d|--debug]... [-v|--verbose]... [-i|--ignorelocking]
+- [-E|--erase_metadata]
+- [-f|--format FORMAT[,FORMAT...]]
+- [--separator SEPARATOR]
++ [\-d|--debug]... [\-v|--verbose]... [\-i|--ignorelocking]
++ [\-E|--erase_metadata]
++ [\-f|--format FORMAT[,FORMAT...]]
++ [\--separator SEPARATOR]
+  [device-path...]
+ 
+ .B dmraid
+  {-s|--sets}...[a|i|active|inactive]
+- [-c|--display_columns][FIELD[,FIELD...]]...
+- [-d|--debug]... [-v|--verbose]... [-i|--ignorelocking]
+- [-f|--format FORMAT[,FORMAT...]]
+- [-g|--display_group]
+- [--separator SEPARATOR]
++ [\-c|--display_columns][FIELD[,FIELD...]]...
++ [\-d|--debug]... [\-v|--verbose]... [\-i|--ignorelocking]
++ [\-f|--format FORMAT[,FORMAT...]]
++ [\-g|--display_group]
++ [\--separator SEPARATOR]
+  [RAID-set...]
+ 
+ .B dmraid
+@@ -117,7 +117,7 @@ will make dmraid tell the kernel to remo
+ underlying the set, ie if sda is part of the set, remove sda1, sda2, etc.
+ This prevents applications from directly accessiong the disks bypassing dmraid.
+ RAID set names given on command line don't need to be fully specified
+-(eg, "dmraid -ay sil" would activate all discovered Silicon Image Medley
++(eg, "dmraid \-ay sil" would activate all discovered Silicon Image Medley
+ RAID sets).
+ 
+ .TP
+@@ -134,7 +134,7 @@ See description of
+ below for FIELD identifiers.
+ 
+ .TP
+-.I [-d|--debug]...
++.I [\-d|--debug]...
+ Enable debugging output. Opion can be given multiple times
+ increasing the debug output level.
+ 
+@@ -214,18 +214,18 @@ is added to the system.
+     During system reboot, enter OROM and mark the new drive as the rebuild drive.  
+     After booting to the OS, use the dmraid command to rebuild.
+ 
+-    Example: dmraid -R raid_set 
++    Example: dmraid \-R raid_set 
+ 
+ 2. Using dmraid to identify a new drive
+     Boot to the OS and use the dmraid command with the new drive as
+ the second parameter.
+ 
+-    Example: dmraid -R raid_set /dev/sdc
++    Example: dmraid \-R raid_set /dev/sdc
+ 
+ 3. Using hot spare drive
+-    Mark a drive as hot spare using the "dmraid -f isw -S" command. Then use the dmraid command to start the rebuild.
++    Mark a drive as hot spare using the "dmraid \-f isw \-S" command. Then use the dmraid command to start the rebuild.
+ 
+-    Example: dmraid -R raid_set
++    Example: dmraid \-R raid_set
+ 
+ .TP
+ .I {-x|--remove} [RAID-set]
+@@ -235,11 +235,11 @@ Delete one or all existing software RAID
+ .I -f FORMAT-handler {-C|--create} --type raidlevel [--size=setsize --strip stripsize] --disk "device-path, device-path [,device-path]"
+ Delete one or all existing Configure a software RAID device  and store the configuration data in a group of hard drive devices consisting of this array. This command requires the following options:
+ 
+--f FORMAT-handler
++\-f FORMAT-handler
+ .br
+-	metadata format (see "dmraid -l")
++	metadata format (see "dmraid \-l")
+ .br		
+---type digit[digit...]
++\--type digit[digit...]
+ .br
+ 	specify the raid level of the software RAID set. 
+ .br
+@@ -251,7 +251,7 @@ Delete one or all existing Configure a s
+ .br
+ 		01: raid01 (isw raid10)
+ .br
+---size: [digits[k|K|m|M|g|G][b|B]]
++\--size: [digits[k|K|m|M|g|G][b|B]]
+ .br
+ 	specify the size of the RAID set.The number is an integer followed by [kKmMgG] and/or [bB].
+ .br
+@@ -267,11 +267,11 @@ Delete one or all existing Configure a s
+ .br
+ If this option is missing, it's set to the default value pre-configured by the vendor. Note that different vendors may apply different constraints on the granularity of the size or the minimal value.
+ .br
+---strip: [digits[k|K|m|M|g|G][b|B]]
++\--strip: [digits[k|K|m|M|g|G][b|B]]
+ .br
+ 	specify the strip size of a RAID1, RAID5, and RAID10 RAID set (as above)
+ .br
+---disk: device-path[{,| }device-path...]
++\--disk: device-path[{,| }device-path...]
+ .br
+ 	specify the array of the hard drives, e.g. /dev/sda.
+ 
+@@ -349,7 +349,7 @@ Use SEPARATOR as a delimiter for all opt
+ .TP
+ .I -s... [a|i] [RAID-set...]
+ Display properties of RAID sets. Multiple RAID set names can be given
+-on the command line which don't need to be fully specified (eg, "dmraid -s hpt"
++on the command line which don't need to be fully specified (eg, "dmraid \-s hpt"
+ would display all discovered Highpoint RAID sets). Enter
+ .B -s
+ twice to display RAID subsets too.
+@@ -377,7 +377,7 @@ Enable verbose runtime information outpu
+ increasing the verbosity level.
+ 
+ .SH EXAMPLES
+-"dmraid -l" lists all supported metadata formats with their names along with
++"dmraid \-l" lists all supported metadata formats with their names along with
+ some descriptive information, eg:
+ .br
+ hpt37x : (+) Highpoint HPT37X
+@@ -400,16 +400,16 @@ dos    : (+) DOS partitions on SW RAIDs
+ .br
+ (0): Discover, (+): Discover+Activate
+ 
+-"dmraid -ay" activates all software RAID sets discovered.
++"dmraid \-ay" activates all software RAID sets discovered.
+ 
+-"dmraid -an" deactivates all active software RAID sets which are not open
++"dmraid \-an" deactivates all active software RAID sets which are not open
+ (eg, mounted filesystem on them).
+ 
+-"dmraid -ay -f pdc" (pdc looked up from "dmraid -l") activates all
++"dmraid \-ay \-f pdc" (pdc looked up from "dmraid \-l") activates all
+ software RAID sets with Promise format discovered and ignores all other
+ supported formats.
+ 
+-"dmraid -r" discovers all software RAID devices supported on your system, eg:
++"dmraid \-r" discovers all software RAID devices supported on your system, eg:
+ .br
+ /dev/dm-46: hpt45x, "hpt45x_chidjhaiaa-0", striped, ok, 320172928 sectors, data@ 0
+ .br
+@@ -420,7 +420,7 @@ supported formats.
+ /dev/dm-58: hpt45x, "hpt45x_chidjhaiaa-1", striped, ok, 320172928 sectors, data@ 0
+ 
+ 
+-"dmraid -s -s hpt45x_chidjhaiaa" displays properties of
++"dmraid \-s \-s hpt45x_chidjhaiaa" displays properties of
+ set "hpt45x_chidjhaiaa", eg:
+ .br
+ *** Superset
+@@ -478,7 +478,7 @@ dev    : 2
+ spare  : 0
+ .br
+ 
+-"dmraid -s -ccs hpt45" displays properties in column format of all sets
++"dmraid \-s \-ccs hpt45" displays properties in column format of all sets
+ and subsets with hpt45* format, eg:
+ .br
+ hpt45x_chidjhaiaa,640345856,128,raid10,ok,4,0
+@@ -487,7 +487,7 @@ hpt45x_chidjhaiaa-a,640345856,128,stripe
+ .br
+ hpt45x_chidjhaiaa-b,640345856,128,stripe,ok,2,0
+ 
+-"dmraid -r --sep : -cpath:size" display paths and sizes in sectors for
++"dmraid \-r \--sep : \-cpath:size" display paths and sizes in sectors for
+ RAID devices in column format using ':' as a delimiter, eg:
+ .br
+ /dev/dm-8:320173055
+@@ -518,18 +518,18 @@ RAID devices in column format using ':' 
+ .br
+ /dev/dm-66:390624896
+ 
+-"dmraid -f isw -C Raid0 --type 0 --strip 8k --size 20g --disk "/dev/sdb /dev/sdc"" creates an ISW volume with
++"dmraid \-f isw \-C Raid0 \--type 0 \--strip 8k \--size 20g \--disk "/dev/sdb /dev/sdc"" creates an ISW volume with
+ a name of "Raid0", 20Gig bytes in total, and 8kilo bytes strip size on two disks.
+ 
+-"dmraid -f isw -C Test0 --type 0 --disk "/dev/sdd /dev/sde"" creates an ISW volume with the default size and strip size.
++"dmraid \-f isw \-C Test0 \--type 0 \--disk "/dev/sdd /dev/sde"" creates an ISW volume with the default size and strip size.
+ 
+-"dmraid -f isw -C Test10 --type 01 --strip 128B --disk "/dev/sda /dev/sdb /dev/sdc /dev/sdd" creates a stacked
++"dmraid \-f isw \-C Test10 \--type 01 \--strip 128B \--disk "/dev/sda /dev/sdb /dev/sdc /dev/sdd" creates a stacked
+ RAID device, RAID10 (isw format), with a name of "Test10", 128 blocks (512bytes) strip size , and the default volume size on
+ 4 disks.
+ 
+-"dmraid -f isw -S -M /dev/sde" marks the device /dev/sde as a hot spare for rebuild
++"dmraid \-f isw \-S \-M /dev/sde" marks the device /dev/sde as a hot spare for rebuild
+ 
+-"dmraid -R isw_djaggchdde_RAID1 /dev/sde" starts rebuild of the RAID volume on device /dev/sde
++"dmraid \-R isw_djaggchdde_RAID1 /dev/sde" starts rebuild of the RAID volume on device /dev/sde
+ 
+ .SH DIAGNOSTICS
+ dmraid returns an exit code of 0 for success or 1 for error.
--- dmraid-1.0.0.rc16.orig/debian/patches/15_isw_incorrect_status_fix.patch
+++ dmraid-1.0.0.rc16/debian/patches/15_isw_incorrect_status_fix.patch
@@ -0,0 +1,322 @@
+Patch include:
+ fix for "Incorrect status displayed when disk is missing" issue.
+ fix for "Missing supported RAID configuration in "-l" option" - Bugzilla bug
+479395
+ fix for "Wrong disk layout in raid01" - no Bugzilla bug.  
+--- a/1.0.0.rc15/lib/format/ataraid/isw.c
++++ b/1.0.0.rc15/lib/format/ataraid/isw.c
+@@ -4,8 +4,11 @@
+  * Copyright (C) 2004-2008  Heinz Mauelshagen, Red Hat GmbH.
+  *                          All rights reserved.
+  *
+- * Copyright (C) 2007,2008  Intel Corporation. All rights reserved.
++ * Copyright (C) 2007,2009  Intel Corporation. All rights reserved.
+  * November, 2007 - additions for Create, Delete, Rebuild & Raid 10.
++ * March, 2008 - additions for hot-spare check
++ * August, 2008 - support for Activation, Rebuild checks
++ * January, 2009 - additions for Activation, Rebuild check
+  *
+  * See file LICENSE at the top of this source tree for license information.
+  */
+@@ -162,7 +165,7 @@ name(struct lib_context *lc, struct raid
+ 
+ 			while (i--) {
+ 				if (disk == isw->disk + i) {
+-					id = i / 2;
++					id = i % 2;
+ 					goto ok;
+ 				}
+ 			}
+@@ -479,7 +482,7 @@ isw_read_extended(struct lib_context *lc
+ 		/* Read extended metadata to offset ISW_DISK_BLOCK_SIZE */
+ 		if (blocks > 1 &&
+ 		    !read_file(lc, handler, di->path,
+-			       (void *) isw_tmp + ISW_DISK_BLOCK_SIZE,
++			       (void *) (((uint8_t*)isw_tmp) + ISW_DISK_BLOCK_SIZE),
+ 			       *size - ISW_DISK_BLOCK_SIZE, *isw_sboffset)) {
+ 			dbg_free(isw_tmp);
+ 			isw_tmp = NULL;
+@@ -708,6 +711,7 @@ super_created(struct raid_set *super, vo
+ 	super->stride = ((struct isw_dev *) private)->vol.map.blocks_per_strip;
+ }
+ 
++
+ /*
+  * rs_group contains the top-level group RAID set (type: t_group) on entry
+  * and shall be returned on success (or NULL on error).
+@@ -1112,6 +1116,15 @@ isw_metadata_handler(struct lib_context 
+ 
+ 		break;		/* case GET_REBUILD_DRIVE_NO */
+ 
++	case ALLOW_ACTIVATE: /* same as ALLOW_REBUILD */
++	case ALLOW_REBUILD:
++		/* Do not allow activate or rebuild, if the log is non-empty */
++		isw = META (rd, isw);
++		ret = !isw->bbm_log_size; /* Is log empty */
++		if (!ret)
++			   log_err(lc, "BBM entries detected!");
++		break; /* case ALLOW_REBUILD */
++
+ 	default:
+ 		LOG_ERR(lc, 0, "%u not yet supported", command);
+ 
+@@ -1144,16 +1157,25 @@ check_rd(struct lib_context *lc, struct 
+ 	 struct raid_dev *rd, void *context)
+ {
+ 	struct isw_dev *dev = rd->private.ptr;
+-
+-	/* FIXME: more status checks ? */
+-	if (dev->status) {
++    if (dev == NULL)
++        if (rd->type == t_spare) return 1;
++        else {
++            LOG_ERR(lc, 0, "No information about %s device on %s "
++                    "in RAID set \"%s\"",
++                    handler, rd->di->path, rs->name);
++            return 0;
++        }
++    /* if disk is ready to read and write return 1 */
++    if ((dev->status & ISW_DEV_READ_COALESCING)
++           && (dev->status & ISW_DEV_WRITE_COALESCING)) {
++            return 1;
++    }
++    else {
+ 		LOG_ERR(lc, 0, "%s device for volume \"%s\" broken on %s "
+ 			"in RAID set \"%s\"",
+ 			handler, dev->volume, rd->di->path, rs->name);
+-
++            return 0;
+ 	}
+-
+-	return 1;
+ }
+ 
+ static int
+@@ -1622,6 +1644,7 @@ _isw_create_first_volume(struct lib_cont
+ 	isw->attributes = MPB_ATTRIB_CHECKSUM_VERIFY;
+ 	isw->num_raid_devs = (rs->type == ISW_T_SPARE) ? 0 : 1;
+ 	isw->family_num = isw->orig_family_num = _checksum(isw) + time(NULL);
++	isw->bbm_log_size = 0;
+ 	isw->check_sum = 0;
+ 	isw->check_sum = _checksum(isw);
+ 	return isw;
+@@ -1719,6 +1742,7 @@ _isw_create_second_volume(struct lib_con
+ 	isw->generation_num++;
+ 	isw->attributes = MPB_ATTRIB_CHECKSUM_VERIFY;
+ 	isw->num_raid_devs++;
++	isw->bbm_log_size = 0;
+ 	isw->check_sum = 0;
+ 	isw->check_sum = _checksum(isw);
+ 	return isw;
+@@ -1941,6 +1965,8 @@ _isw_log(struct lib_context *lc, struct 
+ 	DP("error_log_pos: %u", isw, isw->error_log_pos);
+ 	DP("cache_size: %u", isw, isw->cache_size);
+ 	DP("orig_family_num: %u", isw, isw->orig_family_num);
++	DP ("power_cycle_count: %u", isw, isw->power_cycle_count);
++	DP ("bbm_log_size: %u", isw, isw->bbm_log_size);
+ 
+ 	for (i = 0; i < ISW_FILLERS; i++) {
+ 		if (isw->filler[i])
+@@ -2296,7 +2322,7 @@ isw_delete(struct lib_context *lc, struc
+ static struct dmraid_format isw_format = {
+ 	.name = HANDLER,
+ 	.descr = "Intel Software RAID",
+-	.caps = "0,1,01",
++	.caps = "0,1,5,01",
+ 	.format = FMT_RAID,
+ 	.read = isw_read,
+ 	.write = isw_write,
+--- a/1.0.0.rc15/lib/format/format.c
++++ b/1.0.0.rc15/lib/format/format.c
+@@ -260,6 +260,7 @@ write_metadata(struct lib_context *lc, c
+ 	return 1;
+ }
+ 
++
+ /*
+  * Check devices in a RAID set.
+  *
+@@ -277,7 +278,7 @@ _check_raid_set(struct lib_context *lc, 
+ 				void *context),
+ 		void *f_check_context, const char *handler)
+ {
+-	unsigned int devs;
++	unsigned int dev_tot_qan;
+ 	uint64_t sectors;
+ 	struct raid_dev *rd;
+ 
+@@ -285,36 +286,73 @@ _check_raid_set(struct lib_context *lc, 
+ 		return;
+ 
+ 	sectors = total_sectors(lc, rs);
+-	rs->total_devs = devs = count_devs(lc, rs, ct_dev);
++	rs->total_devs = dev_tot_qan = count_devs(lc, rs, ct_dev);
+ 	list_for_each_entry(rd, &rs->devs, devs) {
+-		unsigned int devices = f_devices(rd, f_devices_context);
++		unsigned int dev_found_qan = f_devices(rd, f_devices_context);
+ 		/* FIXME: error if the metadatas aren't all the same? */
+-		rs->found_devs = devices;
++		rs->found_devs = dev_found_qan;
+ 
+ 		log_dbg(lc, "checking %s device \"%s\"", handler, rd->di->path);
+-		if (T_SPARE(rd) && rs->type == t_raid1 &&	/* FIXME: rs->type check ? */
+-		    rd->sectors != sectors) {
+-			rd->status = s_inconsistent;
+-			log_err(lc, "%s: size mismatch in set \"%s\", spare "
+-				"\"%s\"", handler, rs->name, rd->di->path);
+-			continue;
+-		}
+-
+-		if (devs != devices &&
+-		    f_check && !f_check(lc, rs, rd, f_check_context)) {
+-			rd->status = s_broken;
+-			log_err(lc, "%s: wrong # of devices in RAID "
+-				"set \"%s\" [%u/%u] on %s",
+-				handler, rs->name, devs, devices, rd->di->path);
+-		} else
+-			rd->status = s_ok;
++        /* if disks number of found disks equals disk expected status status OK */
++        if ((dev_tot_qan == dev_found_qan) && f_check
++                && f_check(lc, rs, rd, f_check_context)) {
++            rd->status = s_ok;
++        }
++        else {
++            if(dev_tot_qan != dev_found_qan) {
++                log_err(lc, "%s: wrong # of devices in RAID "
++				    "set \"%s\" [%u/%u] on %s",
++				    handler, rs->name, dev_tot_qan, dev_found_qan, rd->di->path);
++            }
++            /* if number of disks is incorrect, status depends on raid type: */
++            switch(rs->type) {
++                case t_linear:
++                case t_raid0: /* raid 0 - always broken */
++                    rd->status = s_broken;
++                    break;
++                case t_raid1: /* raid 1 - if at least 1 disk- inconsintent */
++                    if(dev_tot_qan >= 1)
++                        rd->status = s_inconsistent;
++                    else if (T_SPARE(rd) && rd->sectors != sectors) {
++			            rd->status = s_inconsistent;
++			            log_err(lc, "%s: size mismatch in set \"%s\", spare "
++				            "\"%s\"", handler, rs->name, rd->di->path);
++                    }
++                    else rd->status = s_broken;
++                    break;
++                case t_raid4:
++                case t_raid5_ls:
++                case t_raid5_rs:
++                case t_raid5_la:
++                case t_raid5_ra: /* raid 4/5 - if 1 disk missing- inconsistent */
++                    if((dev_tot_qan == (dev_found_qan-1) && dev_tot_qan > 1
++                             && f_check && f_check(lc, rs, rd, f_check_context))
++                            || (dev_tot_qan > dev_found_qan))
++                        rd->status = s_inconsistent;
++                    else rd->status = s_broken;
++                    break;
++                case t_raid6: /* raid 6 - if up to 2 disks missing- inconsistent */
++                    if((dev_tot_qan >= (dev_found_qan-2)
++                             && f_check && f_check(lc, rs, rd, f_check_context))
++                            || (dev_tot_qan > dev_found_qan))
++                        rd->status = s_inconsistent;
++                    else rd->status = s_broken;
++                    break;
++
++                case t_spare: /* spare - always broken */
++                    rd->status = s_broken;
++                    break;
++                default: /* other - undef */
++                    rd->status = s_undef;
++        }
++    }
+ 	}
+ }
+ 
+ /*
+  * Update RAID set state based on operational subsets/devices.
+  *
+- * In case of a RAID set hierachy, check availability of subsets
++ f a RAID set hierachy, check availability of subsets
+  * and set superset to broken in case *all* subsets are broken.
+  * If at least one is still available, set to inconsistent.
+  *
+@@ -323,12 +361,19 @@ _check_raid_set(struct lib_context *lc, 
+  */
+ static void
+ _set_rs_status(struct lib_context *lc, struct raid_set *rs,
+-	       unsigned int i, unsigned int operational)
++	       unsigned int i, unsigned int operational,
++           unsigned int inconsist, unsigned int subsets_raid01)
+ {
+-	if (operational == i)
++	if (subsets_raid01 == 1) {
++        rs->status = s_broken;
++        return;
++    }
++    if (operational == i)
+ 		rs->status = s_ok;
+ 	else if (operational)
+ 		rs->status = s_inconsistent;
++    else if (inconsist)
++		rs->status = s_inconsistent;
+ 	else
+ 		rs->status = s_broken;
+ 
+@@ -338,26 +383,30 @@ _set_rs_status(struct lib_context *lc, s
+ static int
+ set_rs_status(struct lib_context *lc, struct raid_set *rs)
+ {
+-	unsigned int i = 0, operational = 0;
++	unsigned int i = 0, operational = 0, subsets_raid01 = 0, inconsist = 0;
+ 	struct raid_set *r;
+ 	struct raid_dev *rd;
+ 
+ 	/* Set status of subsets. */
+ 	list_for_each_entry(r, &rs->sets, list) {
+ 		/* Check subsets to set status of superset. */
+-		i++;
++        if((rs->type == t_raid0) && (r->type == t_raid1))
++           subsets_raid01++; /* Count subsets for raid 01 */
++		i++; /* Count subsets*/
+ 		if (S_OK(r->status) || S_INCONSISTENT(r->status))
+-			operational++;
++			operational++; /* Count operational subsets*/
+ 	}
+ 
+ 	/* Check status of devices... */
+ 	list_for_each_entry(rd, &rs->devs, devs) {
+-		i++;
++		i++; /* Count disks*/
+ 		if (S_OK(rd->status))
+-			operational++;
++			operational++; /* Count disks in "ok" raid*/
++        if (S_INCONSISTENT(rd->status))
++            inconsist++; /* Count disks in degraded raid*/
+ 	}
+ 
+-	_set_rs_status(lc, rs, i, operational);
++	_set_rs_status(lc, rs, i, operational, inconsist, subsets_raid01);
+ 	return S_BROKEN(rs->status) ? 0 : 1;
+ }
+ 
+--- a/1.0.0.rc15/include/dmraid/format.h
++++ b/1.0.0.rc15/include/dmraid/format.h
+@@ -75,6 +75,8 @@ enum handler_commands {
+ 	GET_REBUILD_DRIVE,
+ 	GET_REBUILD_DRIVE_NO,
+ 	CHECK_HOT_SPARE,
++	ALLOW_ACTIVATE,
++	ALLOW_REBUILD,
+ 	/* ... */
+ };
+ 
+--- a/1.0.0.rc15/lib/format/ataraid/isw.h
++++ b/1.0.0.rc15/lib/format/ataraid/isw.h
+@@ -188,6 +188,8 @@ struct isw_dev {
+ 
+ struct isw {
+ 	int8_t sig[MAX_SIGNATURE_LENGTH];	/* 0x0 - 0x1F */
++	uint32_t bbm_log_size;
++	uint32_t power_cycle_count;
+ 	uint32_t check_sum;	/* 0x20 - 0x23  MPB Checksum */
+ 	uint32_t mpb_size;	/* 0x24 - 0x27 Size of MPB */
+ 	uint32_t family_num;	/* 0x28 - 0x2B Checksum from first time this config was written */
--- dmraid-1.0.0.rc16.orig/debian/patches/09_promise-add-offsets.patch
+++ dmraid-1.0.0.rc16/debian/patches/09_promise-add-offsets.patch
@@ -0,0 +1,13 @@
+Author: Luke Yelavich <themuso@ubuntu.com>
+Description: Add extra offsets where promise metadata can be found.
+--- a/1.0.0.rc16/lib/format/ataraid/pdc.h
++++ b/1.0.0.rc16/lib/format/ataraid/pdc.h
+@@ -13,7 +13,7 @@
+ 
+ #include <stdint.h>
+ 
+-#define PDC_CONFIGOFFSETS	63,255,256,16,399,591,675,735,974,991
++#define PDC_CONFIGOFFSETS	63,255,256,16,399,591,675,735,974,991,911,951
+ #define	PDC_DATAOFFSET 0
+ 
+ /*
--- dmraid-1.0.0.rc16.orig/debian/patches/17_isw-probe-hpa.patch
+++ dmraid-1.0.0.rc16/debian/patches/17_isw-probe-hpa.patch
@@ -0,0 +1,144 @@
+Probe isw disks with [some] HPA awareness, thanks to Robert Collins <robert@ubuntu.com>. (LP: #372170)
+--- a/1.0.0.rc16/lib/format/ataraid/isw.c
++++ b/1.0.0.rc16/lib/format/ataraid/isw.c
+@@ -353,6 +353,7 @@ raiddev(struct isw *isw, unsigned i)
+ enum convert { FULL, FIRST, LAST };
+ #if	BYTE_ORDER == LITTLE_ENDIAN
+ #  define	to_cpu(x, y)
++#  define       CVT16(x)
+ #else
+ /*
+  * We can differ from the read_raid_dev template here,
+@@ -547,15 +548,16 @@ disk_ok(struct lib_context *lc, struct d
+ }
+ 
+ static void *
+-isw_read_metadata(struct lib_context *lc, struct dev_info *di,
+-		  size_t * sz, uint64_t * offset, union read_info *info)
++isw_try_sboffset(struct lib_context *lc, struct dev_info *di,
++		 size_t * sz, uint64_t * offset, union read_info *info,
++		 uint64_t const isw_sboffset)
+ {
+ 	size_t size = ISW_DISK_BLOCK_SIZE;
+-	uint64_t isw_sboffset = ISW_CONFIGOFFSET(di);
+ 	struct isw *isw;
++	uint64_t temp_isw_sboffset = isw_sboffset;
+ 
+ 	if (!(isw = alloc_private_and_read(lc, handler, size,
+-					   di->path, isw_sboffset)))
++					   di->path, temp_isw_sboffset)))
+ 		goto out;
+ 
+ 	/*
+@@ -565,9 +567,15 @@ isw_read_metadata(struct lib_context *lc
+ 	to_cpu(isw, FIRST);
+ 
+ 	/* Check Signature and read optional extended metadata. */
+-	if (!is_isw(lc, di, isw) ||
+-	    !isw_read_extended(lc, di, &isw, &isw_sboffset, &size))
++	if (!is_isw(lc, di, isw)) {
++		log_dbg(lc, "not isw at %ld", isw_sboffset);
+ 		goto bad;
++	}
++	if (!isw_read_extended(lc, di, &isw, &temp_isw_sboffset, &size)) {
++		log_err(lc, "isw metadata, but extended read failed at %ld",
++			isw_sboffset);
++		goto bad;
++	}
+ 
+ 	/*
+ 	 * Now that we made sure, that we've got all the
+@@ -578,6 +586,8 @@ isw_read_metadata(struct lib_context *lc
+ 	if (disk_ok(lc, di, isw)) {
+ 		*sz = size;
+ 		*offset = info->u64 = isw_sboffset;
++		log_dbg(lc, "isw metadata found at %ld from probe at %ld\n",
++			*offset, isw_sboffset);
+ 		goto out;
+ 	}
+ 
+@@ -589,6 +599,54 @@ out:
+ 	return (void *) isw;
+ }
+ 
++/* HPA on a disk shifts everything down. This is a 'works-enough' approach to
++ * handling that. There is a better long term approach requiring kernel
++ * patches - see the lkml patches for alt_size.
++ */
++static void *
++isw_try_hpa(struct lib_context *lc, struct dev_info *di,
++	   size_t * sz, uint64_t * offset, union read_info *info)
++{
++	struct isw10 *isw10;
++	void *result = NULL;
++	uint64_t actual_offset;
++	if (!(isw10 = alloc_private_and_read(lc, handler, ISW_DISK_BLOCK_SIZE,
++		di->path, ISW_10_CONFIGOFFSET(di))))
++		goto out;
++	if (strncmp((const char *)isw10->sig, ISW10_SIGNATURE, ISW10_SIGNATURE_SIZE))
++		goto out_free;
++	log_dbg(lc, "Found isw 10 gafr signature.");
++	CVT16(isw10->offset);
++	actual_offset = isw10->offset + 2;
++	log_dbg(lc, "isw 10 sector offset calculated at %hd.", actual_offset);
++	if (actual_offset > di->sectors)
++		goto out_free;
++	result = isw_try_sboffset(lc, di, sz, offset, info,
++		ISW_SECTOR_TO_OFFSET(di->sectors - actual_offset));
++      out_free:
++	dbg_free(isw10);
++      out:
++	return result;
++}
++
++
++static void *
++isw_read_metadata(struct lib_context *lc, struct dev_info *di,
++		  size_t * sz, uint64_t * offset, union read_info *info)
++{
++	void *result;
++	if ((result = isw_try_sboffset(
++		lc, di, sz, offset, info, ISW_CONFIGOFFSET(di))))
++		return result;
++	if ((result = isw_try_hpa(lc, di, sz, offset, info)))
++		return result;
++        log_dbg(lc, "isw trying hard coded -2115 offset.");
++	if ((result = isw_try_sboffset(
++		lc, di, sz, offset, info, (di->sectors - 2115)*512)))
++		return result;
++	return NULL;
++}
++
+ static int setup_rd(struct lib_context *lc, struct raid_dev *rd,
+ 		    struct dev_info *di, void *meta, union read_info *info);
+ static struct raid_dev *
+--- a/1.0.0.rc16/lib/format/ataraid/isw.h
++++ b/1.0.0.rc16/lib/format/ataraid/isw.h
+@@ -36,8 +36,11 @@
+ 
+ /* Intel metadata offset in bytes */
+ #define	ISW_CONFIGSECTOR(di)	((di)->sectors - 2)
+-#define	ISW_CONFIGOFFSET(di)	(ISW_CONFIGSECTOR(di) << 9)
++#define ISW_SECTOR_TO_OFFSET(sector) ((sector) << 9)
++#define	ISW_CONFIGOFFSET(di)	(ISW_SECTOR_TO_OFFSET(ISW_CONFIGSECTOR(di)))
+ #define	ISW_DATAOFFSET		0	/* Data offset in sectors */
++#define ISW_10_CONFIGSECTOR(di) ((di)->sectors - 1)
++#define ISW_10_CONFIGOFFSET(di) (ISW_SECTOR_TO_OFFSET(ISW_10_CONFIGSECTOR(di)))
+ 
+ #define MPB_SIGNATURE	     "Intel Raid ISM Cfg Sig. "
+ #define MPB_SIGNATURE_SIZE	(sizeof(MPB_SIGNATURE) - 1)
+@@ -222,6 +225,14 @@ struct isw {
+ 	// here comes isw_dev[num_raid_devs]
+ } __attribute__ ((packed));
+ 
++#define ISW10_SIGNATURE "$GAFR\x10"
++#define ISW10_SIGNATURE_SIZE (sizeof(ISW10_SIGNATURE) - 1)
++struct isw10 {
++	int8_t sig[ISW10_SIGNATURE_SIZE];
++	uint32_t offset; /* offset to real data, in sectors back */
++} __attribute__ ((packed));
++
++
+ #endif
+ 
+ int register_isw(struct lib_context *lc);
--- dmraid-1.0.0.rc16.orig/debian/patches/20_fix_isw_sectors_calculation.patch
+++ dmraid-1.0.0.rc16/debian/patches/20_fix_isw_sectors_calculation.patch
@@ -0,0 +1,14 @@
+Fix isw raid0 incorrect  sectors calculation, thanks to Valentin Pavlyuchenko
+--- a/1.0.0.rc16/lib/format/ataraid/isw.c
++++ b/1.0.0.rc16/lib/format/ataraid/isw.c
+@@ -776,7 +776,9 @@ _create_rd(struct lib_context *lc,
+ 	r->di = rd->di;
+ 	r->fmt = rd->fmt;
+ 	r->offset = dev->vol.map[0].pba_of_lba0;
+-	if ((r->sectors = dev->vol.map[0].blocks_per_member - RAID_DS_JOURNAL))
++	//fix bugs on ICH10R
++	//if ((r->sectors = dev->vol.map[0].blocks_per_member - RAID_DS_JOURNAL))
++	if ((r->sectors = dev->vol.map[0].blocks_per_member))
+ 		goto out;
+ 
+ 	log_zero_sectors(lc, rd->di->path, handler);
--- dmraid-1.0.0.rc16.orig/debian/patches/01_fix_broken_linking.patch
+++ dmraid-1.0.0.rc16/debian/patches/01_fix_broken_linking.patch
@@ -0,0 +1,121 @@
+Author: Luke Yelavich <themuso@ubuntu.com>
+Description: Fix library symbolic link creation and library linking.
+--- a/1.0.0.rc16/configure
++++ b/1.0.0.rc16/configure
+@@ -693,6 +693,7 @@ DEBUG_MALLOC
+ DMRAID_TEST
+ DMRAID_VERSION
+ DMRAID_LIB_VERSION
++DMRAID_LIB_MAJOR_VERSION
+ DIETLIBC
+ GROUP
+ JOBS
+@@ -5767,8 +5768,10 @@ fi
+ 
+ if test "-f lib/version.h"; then
+   DMRAID_LIB_VERSION="`sed --quiet 's/^.*\(DMRAID_LIB_VERSION\)[^_].*"\(.*\)"/\2/p' lib/version.h`"
++  DMRAID_LIB_MAJOR_VERSION="`grep DMRAID_LIB_MAJOR_VERSION lib/version.h | tr '\t' ' ' | cut -f 3 -d ' '`"
+ else
+   DMRAID_LIB_VERSION="Unknown"
++  DMRAID_LIB_MAJOR_VERSION="Unknown"
+ fi
+ 
+ 
+--- a/1.0.0.rc16/configure.in
++++ b/1.0.0.rc16/configure.in
+@@ -178,7 +178,7 @@ if test x$DEBUG_MALLOC = xyes; then
+ fi
+ 
+ dnl Mess with default exec_prefix
+-if [[ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ]];
++if [ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ];
+  then  exec_prefix="";
+ fi;
+ 
+@@ -220,8 +220,10 @@ fi
+ 
+ if test "-f lib/version.h"; then
+   DMRAID_LIB_VERSION="`sed --quiet 's/^.*\(DMRAID_LIB_VERSION\)[[^_]].*"\(.*\)"/\2/p' lib/version.h`"
++  DMRAID_LIB_MAJOR_VERSION="`grep DMRAID_LIB_MAJOR_VERSION lib/version.h | tr '\t' ' ' | cut -f 3 -d ' '`"
+ else
+   DMRAID_LIB_VERSION="Unknown"
++  DMRAID_LIB_MAJOR_VERSION="Unknown"
+ fi
+ 
+ AC_SUBST(CC)
+@@ -232,6 +234,7 @@ AC_SUBST(DEBUG_MALLOC)
+ AC_SUBST(DMRAID_TEST)
+ AC_SUBST(DMRAID_VERSION)
+ AC_SUBST(DMRAID_LIB_VERSION)
++AC_SUBST(DMRAID_LIB_MAJOR_VERSION)
+ AC_SUBST(DIETLIBC)
+ AC_SUBST(GROUP)
+ AC_SUBST(JOBS)
+--- a/1.0.0.rc16/lib/Makefile.in
++++ b/1.0.0.rc16/lib/Makefile.in
+@@ -65,6 +65,11 @@ ifeq ("@KLIBC@", "no")
+ 		LIB_EVENTS_SHARED=$(top_srcdir)/lib/$(LIB_EVENTS_NAME).so
+ 		TARGETS += $(LIB_SHARED) $(LIB_EVENTS_SHARED)
+ 		INSTALL_TARGETS += $(LIB_SHARED) $(LIB_EVENTS_SHARED)
++		ifeq ("@DIETLIBC@", "yes")
++			LIBDMRAIDLIBS += -ldevmapper_dietc
++		else
++			LIBDMRAIDLIBS += -ldevmapper
++		endif
+ 	endif
+ endif
+ 
+@@ -82,10 +87,11 @@ install_dmraid_libs: $(INSTALL_TARGETS)
+ 	for f in $(INSTALL_TARGETS); \
+ 	do \
+ 		n=$$(basename $${f}) ; \
+-		if [[ "$$n" =~ '.so$$' ]]; then \
++		if echo "$$n" | grep -q '.so$$'; then \
+ 			$(INSTALL) -m 555 $(STRIP) \
+ 				$$f $(libdir)/$${n}.@DMRAID_LIB_VERSION@; \
+-			$(LN_S) -f $${n}.@DMRAID_LIB_VERSION@ $(libdir)/$${n}; \
++			mkdir -p $(prefix)/lib; \
++			cd $(prefix)/lib/ && $(LN_S) -f /lib/$${n}.@DMRAID_LIB_VERSION@ $${n}; \
+ 		else \
+ 			$(INSTALL) -m 555 $(STRIP) $$f $(libdir)/$${n}; \
+ 		fi \
+--- a/1.0.0.rc16/make.tmpl.in
++++ b/1.0.0.rc16/make.tmpl.in
+@@ -44,6 +44,7 @@ endif
+ OWNER = @OWNER@
+ GROUP = @GROUP@
+ DMRAID_LIB_VERSION = @DMRAID_LIB_VERSION@
++DMRAID_LIB_MAJOR_VERSION = @DMRAID_LIB_MAJOR_VERSION@
+ 
+ # The number of jobs to run, if blank, defaults to the make standard
+ ifndef MAKEFLAGS
+@@ -136,7 +137,7 @@ $(TARGETS): $(OBJECTS)
+ 
+ %.so: $(OBJECTS)
+ 	$(CC) -shared -Wl,-soname,$(notdir $@).$(DMRAID_LIB_VERSION) \
+-	-Wl,--version-script,.export.sym $(OBJECTS) -o $@ -ldevmapper-event
++	-Wl,--version-script,.export.sym $(OBJECTS) $(LIBDMRAIDLIBS) -o $@ -ldevmapper-event
+ 
+ $(LIB_STATIC): $(OBJECTS)
+ 	$(RM) $@
+--- a/1.0.0.rc16/tools/Makefile.in
++++ b/1.0.0.rc16/tools/Makefile.in
+@@ -34,12 +34,16 @@ ifeq ("@KLIBC@", "yes")
+ 	DMRAIDLIBS += -ldevmapper_klibc
+ else
+ 	ifeq ("@DIETLIBC@", "yes")
+-		DMRAIDLIBS += -ldevmapper_dietc
++		ifeq ("@LIB_SO@", "no")
++			DMRAIDLIBS += -ldevmapper_dietc
++		endif
+ 		ifeq ("@STATIC_LINK@", "no")
+ 			DMEVENTTOOLLIBS = -ldevmapper-event_dietc
+ 		endif
+ 	else
+-		DMRAIDLIBS += -ldevmapper
++		ifeq ("@LIB_SO@", "no")
++			DMRAIDLIBS += -ldevmapper
++		endif
+ 		ifeq ("@STATIC_LINK@", "no")
+ 			DMEVENTTOOLLIBS = -ldevmapper-event
+ 		endif
--- dmraid-1.0.0.rc16.orig/debian/patches/18_pdc_raid10_failure..patch
+++ dmraid-1.0.0.rc16/debian/patches/18_pdc_raid10_failure..patch
@@ -0,0 +1,14 @@
+fix pdc metadata format handler to report the proper number of devices in a subset
+--- a/1.0.0.rc16/lib/format/ataraid/pdc.c
++++ b/1.0.0.rc16/lib/format/ataraid/pdc.c
+@@ -490,7 +490,9 @@ devices(struct raid_dev *rd, void *conte
+ 	if (context && pdc->raid.type != PDC_T_SPAN)
+ 		*((uint64_t *) context) += rd->sectors;
+ 
+-	return pdc->raid.total_disks;
++	return is_raid10(pdc) ? 
++		pdc->raid.total_disks / 2 :
++		pdc->raid.total_disks;
+ }
+ 
+ static int
--- dmraid-1.0.0.rc16.orig/debian/patches/10_exit_code.patch
+++ dmraid-1.0.0.rc16/debian/patches/10_exit_code.patch
@@ -0,0 +1,22 @@
+Author: Giuseppe Iuculano <giuseppe@iuculano.it>
+Description: Fix exit-code for "No RAID disks" and "no block devices found" errors (LP: #300825)
+--- a/1.0.0.rc16/lib/metadata/metadata.c
++++ b/1.0.0.rc16/lib/metadata/metadata.c
+@@ -2096,7 +2096,7 @@ get_metadata(struct lib_context *lc, enu
+ 
+ 	if (!count_devices(lc, DEVICE)) {
+ 		log_print(lc, "no block devices found");
+-		return 1;
++		return 0;
+ 	}
+ 
+ 	if (!(M_RAID & p->metadata))
+@@ -2118,7 +2118,7 @@ get_metadata(struct lib_context *lc, enu
+ 	if (!OPT_HOT_SPARE_SET(lc) && !OPT_CREATE(lc)
+ 	    && !count_devices(lc, RAID)) {
+ 		format_error(lc, "disks", argv);
+-		return 1;
++		return 0;
+ 	}
+ 
+ 	if (M_SET & p->metadata) {
--- dmraid-1.0.0.rc16.orig/debian/patches/15_activate_multiple_raid_sets.patch
+++ dmraid-1.0.0.rc16/debian/patches/15_activate_multiple_raid_sets.patch
@@ -0,0 +1,12 @@
+Continue onto all raid sets instead of returning after processing the first. (LP: #401713)
+--- a/1.0.0.rc16/lib/metadata/metadata.c
++++ b/1.0.0.rc16/lib/metadata/metadata.c
+@@ -839,7 +839,7 @@ _discover_partitions(struct lib_context 
+ 		 */
+ 		if (T_GROUP(rs)) {
+ 			_discover_partitions(lc, &rs->sets);
+-			return;
++			continue;
+ 		}
+ 
+ 		/*
--- dmraid-1.0.0.rc16.orig/debian/patches/12_support_virtio_devices.patch
+++ dmraid-1.0.0.rc16/debian/patches/12_support_virtio_devices.patch
@@ -0,0 +1,13 @@
+Author: Luke Yelavich <themuso@ubuntu.com>
+Description: Support for checking virtio devices for dmraid metadata.
+--- a/1.0.0.rc16/lib/device/scan.c
++++ b/1.0.0.rc16/lib/device/scan.c
+@@ -174,7 +174,7 @@ interested(struct lib_context *lc, char 
+ 	 * Whole IDE and SCSI disks only.
+ 	 */
+ 	return (!isdigit(name[strlen(name) - 1]) &&
+-		(*(name + 1) == 'd' && (*name == 'h' || *name == 's')))
++		(*(name + 1) == 'd' && (*name == 'h' || *name == 's' || *name == 'v')))
+ #ifdef	DMRAID_TEST
+ 		/*
+ 		 * Include dm devices for testing.
--- dmraid-1.0.0.rc16.orig/debian/initramfs/dmraid.initramfs-local-top/dmraid
+++ dmraid-1.0.0.rc16/debian/initramfs/dmraid.initramfs-local-top/dmraid
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# local-top script for dmraid.
+
+PREREQS=""
+prereqs()
+{
+	echo $PREREQS
+}
+
+case $1 in
+# get pre-requisites
+prereqs)
+	prereqs
+	exit 0
+	;;
+esac
+
+. /scripts/functions
+wait_for_udev 30
+
+# Activate any dmraid arrays that were not identified by udev and vol_id.
+
+if devices=$(dmraid -r -c); then
+	for dev in $devices; do
+		dmraid-activate $dev
+	done
+fi
--- dmraid-1.0.0.rc16.orig/debian/initramfs/dmraid.initramfs-hook/dmraid
+++ dmraid-1.0.0.rc16/debian/initramfs/dmraid.initramfs-hook/dmraid
@@ -0,0 +1,47 @@
+#!/bin/sh
+
+PREREQ=""
+
+prereqs()
+{
+	echo "$PREREQ"
+}
+
+case $1 in
+# get pre-requisites
+prereqs)
+	prereqs
+	exit 0
+	;;
+esac
+
+. /usr/share/initramfs-tools/hook-functions
+
+if [ -x /sbin/dmraid ]; then
+	force_load dm-mod
+	force_load dm-mirror
+	force_load dm-raid45
+	copy_exec /sbin/dmraid sbin
+	copy_exec /sbin/dmraid-activate sbin
+	if [ "$BUSYBOX" = n ]; then
+		copy_exec /bin/grep bin
+	fi
+	if [ -f /etc/udev/rules.d/85_dmraid.rules ]; then
+		mkdir -p ${DESTDIR}/etc/udev/rules.d
+		cp -p /etc/udev/rules.d/85_dmraid.rules ${DESTDIR}/etc/udev/rules.d
+	fi
+	if [ -f /etc/udev/rules.d/85-dmraid.rules ]; then
+		mkdir -p ${DESTDIR}/etc/udev/rules.d
+		cp -p /etc/udev/rules.d/85-dmraid.rules ${DESTDIR}/etc/udev/rules.d
+	fi
+	if [ -f /lib/udev/rules.d/85_dmraid.rules ]; then
+		mkdir -p ${DESTDIR}/lib/udev/rules.d
+		cp -p /lib/udev/rules.d/85_dmraid.rules ${DESTDIR}/lib/udev/rules.d
+	fi
+	if [ -f /lib/udev/rules.d/85-dmraid.rules ]; then
+		mkdir -p ${DESTDIR}/lib/udev/rules.d
+		cp -p /lib/udev/rules.d/85-dmraid.rules ${DESTDIR}/lib/udev/rules.d
+	fi
+fi
+
+exit 0
