--- libauthen-simple-kerberos-perl-0.1.orig/debian/copyright
+++ libauthen-simple-kerberos-perl-0.1/debian/copyright
@@ -0,0 +1,23 @@
+This package was debianized by Xavier Oswald <x.oswald@free.fr> on
+Thu,  8 Feb 2007 20:20:07 +0100
+
+It was downloaded from: http://search.cpan.org/~chansen/Authen-Simple-Kerberos-0.1/
+
+Upstream Author: Christian Hansen <chansen@cpan.org>
+
+Copyright: Copyright (c) 2006 Christian Hansen, ch@ngmedia.com
+
+This program is free software, you can redistribute it and/or modify it under
+the same terms as Perl itself.
+
+License:
+
+    a) the GNU General Public License as published by the Free Software
+       Foundation; either version 1, or (at your option) any later
+       version, or
+
+    b) the "Artistic License" which comes with Perl.
+
+    On Debian GNU/Linux systems, the complete text of the GNU General
+    Public License can be found in /usr/share/common-licenses/GPL' and
+    the Artistic Licence in /usr/share/common-licenses/Artistic'.
--- libauthen-simple-kerberos-perl-0.1.orig/debian/changelog
+++ libauthen-simple-kerberos-perl-0.1/debian/changelog
@@ -0,0 +1,37 @@
+libauthen-simple-kerberos-perl (0.1-3.4.201403110926) ucs4-0-0-0; urgency=low
+
+  * UCS auto build. No patches were applied to the original source package
+
+ -- Univention builddaemon <buildd@univention.de>  Tue, 11 Mar 2014 09:26:23 +0100
+
+libauthen-simple-kerberos-perl (0.1-3) unstable; urgency=low
+
+  * debian/control: Added: Vcs-Svn field (source stanza); Vcs-Browser
+    field (source stanza); Homepage field (source stanza). Removed: XS-
+    Vcs-Svn fields. Add XS-DM-Upload-Allowed: yes.
+  * debian/rules:
+    - delete /usr/lib/perl5 only if it exists (Closes: #467676).
+    - swap binary-arch and binary-indep, this package is arch:all
+    - remove OPTIMIZE, this package is still arch:all
+    - let install-stamp depend on build-stamp
+    - install upstream changelog
+    - don't install README anymore, it's just the text version of the POD
+      documentation
+  * debian/watch: use dist-based URL.
+  * Set Standards-Version to 3.7.3 (no changes).
+  * Set debhelper compatibility level to 6.
+
+ -- Xavier Oswald <x.oswald@free.fr>  Tue, 26 Feb 2008 23:23:03 +0100
+
+libauthen-simple-kerberos-perl (0.1-2) unstable; urgency=low
+
+  * Add README.Debian, /etc/krb5.conf file need to be installed and configured
+  * Add krb5-config to Recommends (Closes: #434772)
+
+ -- Xavier Oswald <x.oswald@free.fr>  Tue, 31 Jul 2007 00:49:58 +0200
+
+libauthen-simple-kerberos-perl (0.1-1) unstable; urgency=low
+
+  * Initial release (Closes: #410237) 
+
+ -- Xavier Oswald <x.oswald@free.fr>  Fri,  9 Feb 2007 16:31:43 +0100
--- libauthen-simple-kerberos-perl-0.1.orig/debian/compat
+++ libauthen-simple-kerberos-perl-0.1/debian/compat
@@ -0,0 +1 @@
+6
--- libauthen-simple-kerberos-perl-0.1.orig/debian/rules
+++ libauthen-simple-kerberos-perl-0.1/debian/rules
@@ -0,0 +1,51 @@
+#!/usr/bin/make -f
+
+PACKAGE=$(shell dh_listpackages)
+TMP = $(CURDIR)/debian/$(PACKAGE)
+
+ifndef PERL
+PERL = /usr/bin/perl
+endif
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+	$(PERL) Makefile.PL INSTALLDIRS=vendor
+	$(MAKE)
+	touch $@
+
+install: install-stamp
+install-stamp: build-stamp
+	dh_testdir
+	dh_testroot
+	TEST_POD=1 $(MAKE) test
+	$(MAKE) install DESTDIR=$(TMP) PREFIX=/usr
+	[ ! -d $(TMP)/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose $(TMP)/usr/lib/perl5
+	touch $@
+
+clean:
+	dh_testdir
+	dh_testroot
+	[ ! -f Makefile ] || $(MAKE) realclean
+	dh_clean build-stamp install-stamp
+
+binary-arch: build install
+
+binary: binary-indep binary-arch
+
+binary-indep: build install
+	dh_testdir
+	dh_testroot
+	dh_installdocs
+	dh_installchangelogs Changes
+	dh_compress
+	dh_fixperms
+	dh_strip
+	dh_installdeb
+	dh_perl
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: binary clean ibinary-indep binary-arch build clean install
--- libauthen-simple-kerberos-perl-0.1.orig/debian/control
+++ libauthen-simple-kerberos-perl-0.1/debian/control
@@ -0,0 +1,21 @@
+Source: libauthen-simple-kerberos-perl
+Section: perl
+Priority: optional
+Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
+Uploaders: Xavier Oswald <x.oswald@free.fr>
+Build-Depends: debhelper (>= 6)
+Build-Depends-Indep: perl (>= 5.6.0-16), libauthen-simple-perl (>= 0.4), libtest-pod-perl, libtest-pod-coverage-perl, libauthen-krb5-simple-perl
+Recommends: krb5-config
+Standards-Version: 3.7.3
+Homepage: http://search.cpan.org/dist/Authen-Simple-Kerberos/
+Vcs-Svn: svn://svn.debian.org/pkg-perl/trunk/libauthen-simple-kerberos-perl/
+Vcs-Browser: http://svn.debian.org/wsvn/pkg-perl/trunk/libauthen-simple-kerberos-perl/
+XS-DM-Upload-Allowed: yes
+
+Package: libauthen-simple-kerberos-perl
+Architecture: all
+Depends: ${perl:Depends}, libauthen-krb5-simple-perl, libauthen-simple-perl
+Description: Simple Kerberos authentication
+ This package allow to use Kerberos authentication methods.
+ .
+ It uses the libauthen-simple-perl framework.
--- libauthen-simple-kerberos-perl-0.1.orig/debian/README.Debian
+++ libauthen-simple-kerberos-perl-0.1/debian/README.Debian
@@ -0,0 +1,10 @@
+When you have lots of connections using libauthen-simple-kerberos-perl, most of
+them end up in TIME_WAIT after short time. Authentication does work but could
+be very slow.
+
+When /etc/krb5.conf is present with the right settings, everything should just
+work fine and this module shouldn't open that much connections. Setting up the 
+right default_realm and its corresponding kdc server in the /etc/krb5.conf do
+the job.
+
+/etc/krb5.conf is part of the krb5-config package.
--- libauthen-simple-kerberos-perl-0.1.orig/debian/watch
+++ libauthen-simple-kerberos-perl-0.1/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://search.cpan.org/dist/Authen-Simple-Kerberos/   .*/Authen-Simple-Kerberos-v?(\d[\d_.]+)\.(?:tar(?:\.gz|\.bz2)?|tgz|zip)
